Page 1 of 1

[SOLVED] CLAAS W 1800 Weight

Posted: Sun Nov 03, 2019 1:04 am
by b101uk
- PC/Mac/PS4/XB1: PC
- Vehicle/Tool/Model/Object: CLAAS W 1800 Weight
- Issue: additional configurations of the base weight with auxiliary ballasts that are the wrong mass, and thus the wrong total mass.
- Single- or Multiplayer: both.
- Steps to reproduce: none needed.
- Does it happen on a standard map without mods yes/no: yes.
- Which vehicles & machines are involved: any the CLAAS W 1800 Weight is attached to with additional auxiliary ballast slab/s.

Additional info:
The W 1800 weight is part of the XERION specific ballasting system.

Each of the additional auxiliary ballast slab have a mass of 400kg (not 200kg like in-game), with 4 that may be attached atop one another, which add up to 1600kg to the 1800kg of the W 1800 weight, giving a total mass of 3400kg for a fully configured W 1800 weight with 4 auxiliary ballast slabs.

correct mass steps would be:
W 1800 weight = 1800kg
W 1800 weight + 1 slab = 2200kg
W 1800 weight + 2 slabs = 2600kg
W 1800 weight + 3 slabs = 3000kg
W 1800 weight + 4 slabs = 3400kg

Link to CLAAS W 1800 weight info:
https://www.claas.co.uk/service_new/par ... hts/xerion


==========================================================================================================

:hmm: maybe something extra? :wink3:

The auxiliary ballast slabs also form part of the rear ballasting options for the Xerion that permits 8 x 400kg auxiliary ballast slabs to be stacked in two stack on a 200kg baseplate for a total of up to 3400kg to be placed on atop just behind the K110 (110mm) ball hitch, which could be interesting, as could a functional K110 (110mm) ball hitch.

Image
Image
Image
Image

K110 (110mm) ball hitch for swanneck trailer, functional? what would its name be if it were as we cant look in the files?:
Image

Re: CLAAS W 1800 Weight

Posted: Sun Nov 03, 2019 3:59 am
by BigC92
I didn't know what that was for, the back plate.

Re: CLAAS W 1800 Weight

Posted: Mon Nov 04, 2019 1:44 am
by iwan073
I’d like it if they made those “slabs” 400kg like in real life

Re: CLAAS W 1800 Weight

Posted: Mon Nov 04, 2019 10:14 am
by desperados93
solved. Changed weights to 1800/2200/2600/3000/3400

the k110 is active. jointType is trailerSaddled

Re: [SOLVED] CLAAS W 1800 Weight

Posted: Mon Nov 04, 2019 5:43 pm
by b101uk
desperados93 wrote:
Mon Nov 04, 2019 10:14 am
solved. Changed weights to 1800/2200/2600/3000/3400

the k110 is active. jointType is trailerSaddled
just to avoid another potential bug report, the slabs at the moment have "200KG" bump/normalmap on them, so a small artwork change will be needed to swap it to "400KG", just in case that was missed.

Thanks for the K110 info.

Re: [SOLVED] CLAAS W 1800 Weight

Posted: Fri Dec 27, 2019 2:51 pm
by Skunkworks
how can you add the slab weights to the rear of the Xerion?