- PC/Mac/PS4/XB1: Xbox 1 X
- Vehicle/Tool/Model/Object: John Deere CP690
- Issue: I lease my cotton bailers and return them when finished harvesting. If you unload the completed bail, and THEN unload unfinished bail, it will not pull the cotton that hasn’t been compressed yet and it won’t allow you to do so after. If you unload unfinished bail BEFORE you unload the completed bail it WILL pull the uncompressed cotton.
Forced to return leased harvester with cotton still in it.
- Single- or Multiplayer: Single
- Steps to reproduce: explained in “issue”
- Does it happen on a standard map without mods yes/no: standard map, yes mods (felsbrunn)
- Which vehicles & machines are involved: John Deere CP690 (the factory add on from dlc)
[Solved] JD CP690 failing to unload
7 posts
Page 1 of 1
-
- Posts: 4923
- Joined: Tue Jul 16, 2019 7:34 pm
Re: JD CP690 failing to unload
Have been that way since the dlc came out. Giants seems like they don't want to correct any of their dlcs.
1300 acre farm, finish out just about 10,000 hogs a year, 200 cattle, and xbox one and pc user.
- Charcoaler81
- Posts: 1668
- Joined: Sun Nov 24, 2019 8:14 pm
Re: JD CP690 failing to unload
Sorry, CP690 works like in reality, it has a collector, a pre-chamber and the compressing unit. So the way is Collector - Pre-chamber - baler - "balefork" at the back.
All that can be unloaded is the stored bale and the unfinished bale, not pre pre-chamber (2500 liters).
All that can be unloaded is the stored bale and the unfinished bale, not pre pre-chamber (2500 liters).
LS19 auf XB1.
LS22 auf PC.
Minibrunn forever
Freund kleiner Landtechnik, gross kann jeder
LS22 auf PC.
Minibrunn forever
Freund kleiner Landtechnik, gross kann jeder
-
- Posts: 4923
- Joined: Tue Jul 16, 2019 7:34 pm
Re: JD CP690 failing to unload
How do you get that out to clean it then? Like when you finish harvest for the year.
1300 acre farm, finish out just about 10,000 hogs a year, 200 cattle, and xbox one and pc user.
Re: JD CP690 failing to unload
It does move it into the existing partial bale if you click remove unfinished bale BEFORE you u load the completed bale.
And yes IRL you are able to remove what is in the compression chamber when finished. Not only when it’s full.
You not going to leave a harvester til next season with junk still in it, that’s just asking for trouble.
And yes IRL you are able to remove what is in the compression chamber when finished. Not only when it’s full.
You not going to leave a harvester til next season with junk still in it, that’s just asking for trouble.
-
- Posts: 4923
- Joined: Tue Jul 16, 2019 7:34 pm
Re: JD CP690 failing to unload
Gotcha that's what I was thinking. There has to be a way in order to clean it.
1300 acre farm, finish out just about 10,000 hogs a year, 200 cattle, and xbox one and pc user.
Re: [Solved] JD CP690 failing to unload
Moving as issue was solved
7 posts
Page 1 of 1