Feeders

nopulse
Posts: 2
Joined: Thu Nov 08, 2012 6:55 am

Feeders

Post by nopulse » Thu Nov 08, 2012 7:00 am

What's the purpose of shelling out $139k for the Kuhn SPV Confort 12, when you have to load the mixtures the same as the Primor 3570m and the Profile 1880?

Other than maybe having the convenience of not having to pull it behind a tractor, I see no real benefit from the SPV Confort 12 from the other 2 feeders. If you could load ALL the mixtures via the front loading attachment, then it would make the other 2 feeders obsolete.

Maybe in a patch, Giants could make it so the SPV Confort 12 can pick up hay, straw and maize/grass with the front loader on the machine just like a forger trailer does.

Sucratzz
Posts: 30
Joined: Sat Nov 03, 2012 7:17 am

Re: Feeders

Post by Sucratzz » Thu Nov 08, 2012 7:47 am

Haven't used it yet, but I would presume it holds more.

Dr Reyling
Posts: 14
Joined: Fri Oct 19, 2012 9:59 pm

Re: Feeders

Post by Dr Reyling » Sun Nov 11, 2012 7:59 pm

Sucratzz wrote:Haven't used it yet, but I would presume it holds more.
Your Presuming !!! Why would you respond to this Post Unless you knew ? Hows about some Instructions Or Tips on how to USE it. No wounder this Community is a Cluster. :!:

User avatar
CornetPlayer
Posts: 506
Joined: Sun Oct 28, 2012 1:29 pm

Re: Feeders

Post by CornetPlayer » Sun Nov 11, 2012 8:07 pm

Dr Reyling wrote:Your Presuming !!! Why would you respond to this Post Unless you knew ? Hows about some Instructions Or Tips on how to USE it. No wounder this Community is a Cluster. :!:
Good, the forum police have arrived. *thumbsdown* Thanks to anonimity of the internet, you can spew your vitriol without consequence. And yes, were you standing in front of me, I'd say this to you as well.

User avatar
markothevrba
Posts: 170
Joined: Fri Nov 02, 2012 1:33 am

Re: Feeders

Post by markothevrba » Sun Nov 11, 2012 8:33 pm

Don't mind this, just dropping in a notification reply, because this might get interesting.

But on topic. I think with the self propelled feeder you don't need a front loader for sillage, because it can *censored* up with the thing in the front that everybody tries to mow grass with :mrgreen:
Again, I am not 100% sure, but I am fairly certain it can

Punnikin
Posts: 98
Joined: Fri Nov 09, 2012 1:38 am

Re: Feeders

Post by Punnikin » Sun Nov 11, 2012 9:02 pm

With the self-propelled feeder you load 1 bale of hay, 1 bale of straw, then use the grinder on the front to load up silage without the need for a FEL. You can more easily guage the mix that way, making certain the mix is correct, and you can also use it as a hay/straw shredder by putting only those in the hopper and emptying them into the feed troughs. In short, the self-propelled feeder takes the place of both the bale shredder and the trailered feeder as well as making it far easier to get a proper feed blend.

There. Question answered.

Dr Reyling
Posts: 14
Joined: Fri Oct 19, 2012 9:59 pm

Re: Feeders

Post by Dr Reyling » Sun Nov 11, 2012 9:11 pm

CornetPlayer wrote:
Dr Reyling wrote:Your Presuming !!! Why would you respond to this Post Unless you knew ? Hows about some Instructions Or Tips on how to USE it. No wounder this Community is a Cluster. :!:
Good, the forum police have arrived. *thumbsdown* Thanks to anonimity of the internet, you can spew your vitriol without consequence. And yes, were you standing in front of me, I'd say this to you as well.
Thanks

Dr Reyling
Posts: 14
Joined: Fri Oct 19, 2012 9:59 pm

Re: Feeders

Post by Dr Reyling » Sun Nov 11, 2012 9:13 pm

CornetPlayer wrote:
Dr Reyling wrote:Your Presuming !!! Why would you respond to this Post Unless you knew ? Hows about some Instructions Or Tips on how to USE it. No wounder this Community is a Cluster. :!:
Good, the forum police have arrived. *thumbsdown* Thanks to anonimity of the internet, you can spew your vitriol without consequence. And yes, were you standing in front of me, I'd say this to you as well.

You would not Stand A Chance. RAT

EDIT derSchreiner: You bacame 7 days of Boardholiday for libel

Punnikin
Posts: 98
Joined: Fri Nov 09, 2012 1:38 am

Re: Feeders

Post by Punnikin » Sun Nov 11, 2012 9:20 pm

Dr Reyling wrote:
CornetPlayer wrote:
Dr Reyling wrote:Your Presuming !!! Why would you respond to this Post Unless you knew ? Hows about some Instructions Or Tips on how to USE it. No wounder this Community is a Cluster. :!:
Good, the forum police have arrived. *thumbsdown* Thanks to anonimity of the internet, you can spew your vitriol without consequence. And yes, were you standing in front of me, I'd say this to you as well.

You would not Stand A Chance. RAT
Let's not start a flame war, okay? Your comment was absolutely not constructive or helpful in any way. Play the game and relax a bit.

Dr Reyling
Posts: 14
Joined: Fri Oct 19, 2012 9:59 pm

Re: Feeders

Post by Dr Reyling » Sun Nov 11, 2012 9:35 pm

CornetPlayer wrote:
Dr Reyling wrote:Your Presuming !!! Why would you respond to this Post Unless you knew ? Hows about some Instructions Or Tips on how to USE it. No wounder this Community is a Cluster. :!:
Good, the forum police have arrived. *thumbsdown* Thanks to anonimity of the internet, you can spew your vitriol without consequence. And yes, were you standing in front of me, I'd say this to you as well.
Consequence is in this case that I can NOT say whats on my mind and I guess You think your better than Every One Else. You Spew A Lot of Nothing as well and I am NOT Standing In Front Of You so what are you going to do about It ????????? You want my address ???? Come on I dare you. You really will not like it at all.

User avatar
CornetPlayer
Posts: 506
Joined: Sun Oct 28, 2012 1:29 pm

Re: Feeders

Post by CornetPlayer » Sun Nov 11, 2012 9:56 pm

Dr Reyling wrote:
You would not Stand A Chance. RAT
Image

Einschtein
Posts: 9
Joined: Sun Nov 11, 2012 7:06 pm

Re: Feeders

Post by Einschtein » Sun Nov 11, 2012 10:13 pm

Whatafool.

Dr Reyling
Posts: 14
Joined: Fri Oct 19, 2012 9:59 pm

Re: Feeders

Post by Dr Reyling » Sun Nov 11, 2012 10:17 pm

Einschtein wrote:Whatafool.
I am Glad you Like It Ace !!!!!!!!!!!!!!!

Cpt.Ass
Boardurlaub/Boardholidays
Posts: 709
Joined: Sun Oct 28, 2012 9:04 pm
Location: Holbæk, Denmark

Re: Feeders

Post by Cpt.Ass » Sun Nov 11, 2012 10:24 pm

CornetPlayer wrote:
Dr Reyling wrote:
You would not Stand A Chance. RAT
Image
Lmfao :lol: :lol: :lol: :lol: :lol:

Nice pic *thumbsup*
Steam: mikerowe666 - feel free to add me.

User avatar
markothevrba
Posts: 170
Joined: Fri Nov 02, 2012 1:33 am

Re: Feeders

Post by markothevrba » Sun Nov 11, 2012 11:58 pm

@CornetPlayer, if you are scared for your life you can hide at my place, I even got whiskey and poker to pass time :mrgreen:

Post Reply