Patch notes PLEASE

[Dexadrinne]

Steam downloaded 26.6mb Update
Patch notes would be good please

[MrHoot]

Seconded!

[73514]

I would also like to see the patch notes.

[firstdayreviews]

well... the processor and tree physics still glitch out so that didn't get fixed haha

They also didn't add the Butt N Top loader I requested (just kidding)

Judging by the smallness of the patch I would assume its only fixing critical stuff like crashes or mplayer major problems, I assume they will have a larger more comprehensive patch coming out later

[Taff_in_Exile]

Yep would be interested in the patch notes

[Stegei]

The patch only includes a few fixes that mainly relates to people having black/white screens when launching the game.

We are currently working on a larger patch that will fix many of the gameplay issues.
There is a thread in the forum that summaries the currently reported bugs, along with the current state of the patch.
Unfortunately only in German, but at least you can see the scope of the progress. Green means already fixed.
http://forum.giants-software.com/viewto ... 29&t=67902

[strauts6]

OMG so manu bugs!

[farmallfrenzy]

***I hope nobody minds, I wanted to post the patch updates from the German language page to the English forum so those of us that don't speak German could read them. My apologies if I'm overstepping my bounds - please delete if that's the case****



[LS15] Reported bugs from v1.1 - Summary

Re: [LS15] Reported Bugs - Summary

by MadMax »Tue Oct 28, 2014 7:07 pm

WIP # 1:

- Grimme 260: when folded down end of the unloading belt potatoes still run in the original location further
- NH vs. T5.90 NH CR10.90: angebl. different yields for rape
- Jenz hacker: Does not draw a Completely (approx 1m piece remains lie)
- Pottinger Euro Boss: Lets unleveled grass meadows in places
- Ponsee Buffalo: Switch to the direction of travel arrow shows the direction of the minimap in the wrong direction and cruise control driving in wrong direction
- Ingame Clock: would angebl. not count correctly (eg 5min real time in comparison)
- Semi-trailer Krampe: Plane looks out at about 70-80% on the sides
- Fliegl DPW 180: Does not fit properly bales
- Väderstad Rapid: wheels on the front of the Drille turn immediately at maximum speed with approximately 3s, then complete standstill.
- Stoll round bale fork: bales hold not reasonable
- Kroger TAW30: Plane goes tw. by sidewall image
- MP: Chainsaws disappear after server restart (?)
- MP: Once you remove a mod from the server, the game will not start because angebl. the mod no longer prev. is
- Forestry: If a tree at the shop is delimbed, all not yet been sawed, same mitentastet image
- Fliegl Bull: Plane looking through picture
- Fliegl Bull: Planning tw. through the ship's sides to see image
- Horsch Pronto: No-till possible, in reality, already
- Exhaust: If you switch to an attached device, without the flicker transition increases
- Buckets / Forks: Sometimes when dump remain despite empty bucket visual content image
- Grimme SE: Can be folded, while the transfer belt is extended image
- MAN TGS: sun visor from a certain angle of wheel covers image
- Sawmill: logs can fall through the wooden bridge with railroad tracks image
- Dedi: When working on the BGA in MP, it is jerky when all players
- Vehicles that do not have PTO can operate PTO driven equipment
- FSI: Sometimes the stump is milled away within seconds, sometimes it takes minutes
- Liebherr TL: Extreme left mirror shows exactly on the trim box image
- Liebherr TL: The left mirror is facing the very outside image
- Liebherr TL: Check power vMax difficult to reach etc
- Krampe BB900S: maintenance cost of 40 € in relation to low
- Lemken Diamant 12: front wheel hangs when turning under image
- Grimme Tectron / Maxtron: Automatic overloading does not work, you have to first go into the harvester and activate this
- BGA: Check trigger on Fliegl Rondomat - discharges onto this one by Liebherr TL comes at no silage
- Helper: If the helper is the end of the game just before the end of the field, this limit does not recognize the field after restart and drive straight ahead further picture1 , picture2
- High demand: disappears at midnight, although a residual maturity of 4h is left
- Grimme Tectron: PS buggt soon as you move the camera image
- Kroger TAW 30: Position of Abschiebers not fit when unloading to the quantity remaining. Slider is almost completely behind it are still 35% in the trailer
- Dedi: Easy Flow on BigX takes on grass, but not removed it from the ground. Can not be taken with LW
- Jenz: stem wood of deciduous trees is assumed bad
- Helper: Drescher drive with raised cutting further if abtankt nearing 100% level
- Scale rakes: if you schwadet straw in the rear 2 gyros the stubble removed image
- Seed: trigger only works on one side (the one that is on the farm)
- BGA: angle to sail much too steep, you get almost no up / down image
- Jenz HEM: The pickup roller should have a collision, then the strains were also detained and would not keep falling out
- NH TC5.90: straw comes in the wrong place out image
- Fliegl Bull: give in case of strong is the rear tires of the tractor in the drawbar
- Shop: Sells you the Jenz HEM, while the tipper on the chopper and the chopper depends on the tractor, you can attach to the tractor no longer tipper
- Stepa Rückewagen: Logos are not dirty


Re: [LS15] Reported Bugs - Summary

by MadMax »Thu Oct 30, 2014 5:51 pm

# Messages:

- NH TC 5.90: trailerAttacher too high image
- Liebherr Wheeled Loader: main arm does not lower far enough from
- Capello corn head: Will not lowered far enough
- Suer weights: Are my high pressure cleaner washable only in one place image
- Kröger HKD 302: reduce dumping angles backward image
- Stepa FHL 13: hydraulic cylinder on the supports do not move
- Case 9230: cutting is lowered too much (combination of tutorial)
- Case Magnum 380+ Krampe Bandit 750: wobbles team if you abtankt with Combine Harvester
- Kuhn VB 2190 (Modhub): Press exclusively produced straw bales
- Diesel consumption: increase (should last about 5 hours ingame)
- Wheel loader bucket: missing polygons on material round bottom image
- Liebherr Tele handlers: to use a tool with function, the device selection must be operated. To move the arm to re-
- TAM Iguana 24: Chocks missing
- When swaths of straw no PS is displayed. Only the plume grass
- Horsch PRONTO 9 SW - capacity target: 12000l
- Fliegl trailer: Rundumleuchte missing (Heavy Transport)
- Range tree seedlings: too heavy
- Steyr 4115: Check rear hydraulics (top link)
- Pottinger Novacat: Raises not far enough for small tractors from
- XDisc lowers too far from
- Bjorn Holm Field 22: Terrain looks through the street image
- Bjorn Holm biomass power plant: Park Lines float, a floating pier at the back left building the fence
- Stoll front loaders: dumping angles not large enough image
- Ponsee / Stepa / Jenz: The holding force of the pliers is too small tribes slip from the pliers
- Traffic: Cars drive off despite traffic
- Stepa: stands after reload a savegame rotated by 180 °
- Rain: If the machinery / equipment clean only half, not completely
- Chainsaws: would disappear when you save and start the game again
- Varifeed 18FT @ NH TC5.90: SW is dirty faster compared to Drescher
- Kärcher: In MP of all players hear
- Kärcher: The pick up and deposit the lance produces a clicking sound which can be heard every MP player
- Kärcher: Charged SW can not or very difficult to clean
- Amazone UF1801 + ZA1501: change focus, can no longer be erected after the fall
- Train: If you send the train off in MP, this is not gesynced with the other players. Train stops for the players
- Dedicated Server: Currently only 16 characters. 24 characters would be good
- Machine: to narrow tire tracks
- Kuhn VB2190: Hay look like straw bales
- Stepa FHL 13 AK: No PTO available
- NH TC5.90 can not be unloaded on Fliegl ASS 298
- Enable gamepad, adjust control, game restart (Error: Running LUA method 'init' / D: /code/lsim2015/build/finalbin/dataS/scripts/gui/PlacementScreen.lua (129): attempt to index a nil. value)
- Deutz TTV7250 & Lambo Mach 230: front wheels must be deeper, see handlebars
- Dedicated Server: On start WBH is indeed selected, started, however, is always the Bjorn Holm Map (Set Map: West Bridge Hills / display in the web interface (Home): Westbridge Hills / display in Statslink: mapName = "Bjorn Holm" / display in Webstats WBB 4.0 : Bjorn Holm)
- NH BB1290: correct steeringAxleRotation
- Tire tracks: Slot number should be set in the menu (If possible !! by xml)
- NH CR 10.90: Outdoor Cam too close, indoor Cam too high
- Stoll: The tines of the fork pallet does not fit the pallets (distance too large)
- Jenz HEM: props go too far down, a rear attached HKD302 is not recognized by the ejection tube
- MAN TGS: Front hitch without function
- Krampe SB30 / 60: Missing component and shadow change in the use of tarpaulin picture1 , picture2
- Ursus Wrapper: In MP the winder takes the first bale on, this is not visible from then, not wrapped and takes no further bales more (data / maps / models / objects / round bales / roundbaleSilage_w112_d130.i3d (1.78 ms) / Error : Invalid event id)
- Liebherr L538: badReferenceFrame @ zKinematic-ArmDummy / arm / dummy
- Bjorn Holm: Floating building between field 37 + 38 image , west of the field 38 image , the shop image
- Bjorn Holm: Grass growing in shelter in the pasture image (only occurs if you have created the savegame before the first patch)
- Timber Runner: Zoom Runge distance
- Management of small tractors sensitive than the large (50 ° / sec is ok)
- Liebherr L538: Check the blade adapter image
- Lizard Timber claw: not attached correctly picture1 , picture2
- NH BB1290: After discharged in the MP table is no longer hinged and the press can not be switched on
- Mission time: In MP a change in the mission time is not gesynced
- Deliver grain transport mission: Bonus time greatly exaggerated (3000 € and 500,000 € bonus time bonus @ difficult)
- Ponsee Scorpion: Can not make all tribes / delimbing, since the length to max. 5m is adjustable
- NH T4.75: Collision strainer and Frontladerkonsole image
- Sampo Comia Cutting: Reel may be too far back (tines hit in cutting device) image
- Amazone FT1001: Can not empty syringe with an attached
- Grimme Tectron / Maxtron: lifting unit can not be excavated separately, without the compl. Turn off machine
- Error message when Gamepad and steering wheel "6:02 Game Engine has stopped working" fix
- Growth: Had handy if you could stop this menu (due to order all fields, several meadows mowing etc ...)
- NH T8.435: Rear wheel has too much slip
- Dedicated Server: Server does not create backups Score
- Errors in some descriptions: picture1 , picture2 , picture3 , picture4
Switch control on steering wheel, delete all assignments not required - -> Game will not start
- Control on joystick switch 2 -> Game will not start
- Fliegl Dolly: fifth wheel slide rearward (collides with 25m³ barrel) and reduce wheel diameter (too high)
- Case Puma 160: Should have 203PS
- Ball collection weighing: If client unloads and the table is lowered again, packetReceived error
- Liebherr TL432: Chock missing
- Amazone plow: Buy, fold up, turn off: If not on the floor on
- Deutz 7250TTV: reduce slippage
- Built-in dirt-speed levels
- Väderstad hydraulic
- Sampo Comia: Incorrect Strohhäckselanimation
- It thrashes in the helper mode for grain equal rape, the ejection-PS is not switched on chopper
- High demand: prices to check
- Operating costs Kärcher too high
- NH Belt: Coronas of the front position lamps (white) hanging on the tailgate and swing open with the
- Reduce steering rates
- Maxtron: correct mass
- Amazone FT 1001 - Do not wash
- Kroeger HKD302: To unload the right text box appears for loading from the Silo
- Sampo vs. smaller SWW: SW can not be lifted high enough to put this on the SWW can
- Kärcher: Display in the left HUD "R switch the high pressure cleaner" remains when you climb into a FZ with HDR enabled by email
- Case Puma: Front disc shines through
- Kuhn Butterfly: PS lacks dressers in MP
- It thrashes in the helper mode for grain equal rape, the ejection-PS is not switched on chopper
- Kuhn FC 10030: mount the cylinder piston too long in transport position image
- Ursus 15014 wiper goes through the disk image
- MP: password of the client is no longer stored, was corrected in LS13
- Sampo Comia: Incorrect Strohhäckselanimation image
- Arcusin: The forks carrying the bales in the stack, collide with the shooting mechanics
- Kuhn GA: When you turn the power on after purchase or a restart of the animation jumps of Computing
- Cruise control: Saves the last preset speed not to restart games
- Info menu: total time of the machined surface is not saved and starts every time it restarts from 0
- Info Pages: Last viewed Info page should call when re-appear first
- NH T4.75: Frontladerkonsole depends exhaust image
- Kroger TAW30: Will not / hardly loaded by harvesters. Is possible only if the pipe is on the board wall
- Fliegl Bull: Can not be filled at any point of harvesting machinery
- Chaff: Income too low, please check (income now adapted to the German average: 435dt / ha @ 32% DM @ 430kg / m³ = 102m³ (previously 92,5m³ !!))
- Liebherr TL: desöfteren dump angle is too low, please check
- NH BB1290 / Belt: Putting the press back when there is still a completed bale in it, this will spawn on the press. If you hang the press again, this is thrown around
- MP: After rebooting the server, the bales of not emptied NH-presses hang behind / above image
- Store: Declared the blades missing




- Vehicles excessive side slip
- Jenz HEM581: chopper pulls a bad, trigger too small
- MP: Client tree falls and delimbed. With each new cut the branches are again set back
- MP: name of the client by the flickering screen as soon as you move
- MP: fillplanes the trailers are not synchronized
- Pottinger Euro Boss: Plane is not up to the network
- General acceleration too high.
- TAM Iguana Quattro: moves when you come in the near
- Ball Cart: tw. hover the bales, the bales are pushed load, as if a collision prev. would
- VSYNC is not synchronous, tw. the image flickers and distorts
- Stepa FHL 13: After a score was reloaded, the invited tribes of Stepa have disappeared
- Ponsse Buffalo: Stämmer tremble and slip on the surface Runge
- Helper @ Amazone ZG-B8200: helper drives a car and then stops
- Cultivators gen .: draft requirement decrease a little
- Vehicles slipping image
- Horsch Maestro: Jump at work and leaves ungedrillte strip
- Kuhn SPV: No litter cover in MP visible image
- Bjorn Holm @ Dedi: box 29 with barley grown (mature ingame / statusmap) can not be harvested picture1 , picture2
- Sampo Comia: mirror not usable, incorrectly set picture1 , picture2
- Speed: It is not possible with the accelerator pedal (Logitech G27 + G25) to keep the speed. Only the duration of up to Vmax is affected by the angle of the pedal
- Dedicated Server: Vehicles slipping even when pausiertem game
- Wheels from locking during braking with pedal control and implementation generally too hard video
- BGA: tire tracks left on the silo on the road in the air
- BGA: Client sticking with the Universal bucket on ground
- Special offers should appear as a Note
- Lemken Gigant: When open for helper application in MP Graphic Error: picture1 , picture2 , picture3 , picture4
- Lemken Gigant: during the folding process from slipping off the tractor
- Error information panel: (Error: Running LUA method 'update' / D: /code/lsim2015/build/finalbin/dataS/scripts/gui/BlackboardView.lua (188): attempt to index local 'mission' (a nil value. ) / Error: Running LUA method 'mouse event').
- Forestry: Trees give too much money in all difficulty levels
- Forestry: texture of stump missing image
- Trees roll after the cases tw. further long (is that firs have no branches with Colli)
- Tw. floating branches image
- Trees: do not the Collis Some sawed trees image
- Ponsse Buffalo: Charged tribes slip too easily
- Ponsse Scorpion: If you draw a tree and descends in front of the delimbing, the log is not retained
- Scorpion + Ponsse Buffalo: It is not many climbs high, it lacks a little power
- Ponsse Scorpion: Saws sometimes without command from trees, sometimes happens when the tool encloses the tree. This then also lacks the cutting edge animation
- Ponsse Buffalo: was after the savegame reload the load of the machine free image
- Ponsse Buffalo: this is loaded sold, the trees hang image

- NH T6 & Steyr Multi: front loader goes (folding design might lower link) by lower link
- Deutz Agro Star: Verify that this dirty faster than others
- Trelleborg tires: If direction arrows exist, they point to the left in the wrong direction
- Front-end loader tools: control on the other hand & dump inverted
- Helper does not recognize building
- Helper: When activated, the helper machines pollute twice as fast than if you even drive
- Helper always goes the max. permissible speed of the attachment. If you want to, that the work is done more slowly, this is not possible
- Case Magnum 380: Is slower than other dirty tractor
- Cruise Control: Selected speed should apply also reset for the
- Vogel & Noot Heros 1000: helper can the plow at the headland not rotate correctly, plow will quickly dirty
- Combines gen .: ladder should be collapsed only in transport mode
- MAN: Attacher sits too high (distance between the saddle plate and trailer) (Necessary for Physics !!)
- Buhrer 6135: Only one outside mirror active
- Crown BigX: ejection particle system to short & tw appears. not
- Change prices at Case Puma and NH T6 (Puma would be more expensive than the T6, since 6-cylinder)
- Fliegl Timber Runner: Trailer is not recognized at the sawmill from the trigger and therefore not discharged
- Prices at BB NH 1290 and NH 150 Belt change (BB1290 would be much more expensive)
- Sampo Rosenlew Comia C6: All reapers other Drescher be coupled
- Stepa FHL 13: When to use the crane to the tractor engine is off, because you have to change
- MAN: beacons are missing (Heavy Transport)
- Liebherr L538: Gripping Pliers for loading of manure and bale fork missing
- NH BB1290: power requirement reduced a little (power requirement of 122PS at PTO OK !!)
- Kuhn FC3525F / FC10030: sides not foldable (transport mode) / saver not hinged Video
- Cultivators: it is possible to grub bern everywhere
- Chicken: Game crashes when buying from (not reproducible !!)
- Animals: The confirmation of the purchase should be removed
- Mowers: reduce power requirements (requirement is ok !!)
- Kärcher: The work order is not gesynced
- Turn signal: if fertilizer spreader is coupled forward direction is reversed image
- Drills: In the shop not clear what direct seeding support (not true !!)
- MAN TGS: behind a TrailerAttacher should be attached
- No driver on the controllable vehicles (not reproducible !!)
- Kuhn GA: Can only plume grass. For hay it deletes it and does not create a swath (not reproducible !!)
- Sawmill Sales Trigger is very deep image (set deeper so that tribes must be unloaded)
- Chips: A conveyor belt stock would make sense (who has the money for a hacker, even a FL should have)
- Interior: Mirror not in sight
- Fliegl trailer: Is 14k a bit too cheap
- Axis_Frontloader_Tool must be reversed
- Sampo Comia: Missing textures picture1 , picture2
- NH CR 10.90: Plane grain tank has wrong shape images
- Capello Quasar F4: tips are not collapsed (Road Transport)
- Horn: horn sound does not match the machine
- Grimme Tectron: Wide angle mirror left without function
- Shine on vehicles and equipment general too high.
- Case Magnum 380: texture pixelated (bonnet / roof / rear lights)
- Grimme Tectron: Plane of the transfer belt is clipping in a conveyor belt image
- Grimme Tectron: conveyor belt is clipping in cylinder piston, the real name is. should move with image
- MAN TGS: check price, supposedly should max. Cost 100k
- BGA: a small ramp in front Fliegl`s Rondo Maten would be helpful
- Case Quadtrac: shaft is not animated image
- The MAN has a normal front axle, road version. The front wheels are driven but still (So willed !!)
- Control options: a more precise definition currently stands devices axis 3 or 4
- Damcon tree-planter: If the seedlings take independently and not just by pressing "R" in the coupled tractor
- Kuhn GA: No sound when hydraulic up / fold or raise / lower the centrifugal
- Combine Header Trailer: reapers should be attached (slide of the followers)
- Jenz HEM: crane camera is missing
- Maps from Mod v1.1.0: loading times higher (zipped Bjorn Holm 55sec, 5sec unzipped)
- MP: Animated doors and gates are not synced with other players
- Vogel & Noot Terradisc: the front red position lights should be white image
- Double occupancy is close tarpaulin and lower front loader the N key
- Väderstad Tempo: After 3 tracks already sow dirty
- NH TC5.90 TAM @ Iguana 24: Chopper protection depends in cutting image
- Feature: Two cruise control levels 1-3 and 4-6, Store view feature: low or Highattacher
- The helper should use as the very beginning of the LS 13, the marker arms.
- Straßenleitpfähle (and signs) diving only 50 meters before you are there to
- Baler, loading wagons - No feed particle system on pickup available
- If you unloads the train you get double money if you can leave the train
- Zunhammer Liquid manure Side tube to fill not animated
- Kuhn FC 3525 F recordings clipped by the plane
- New Holland T9 sound from startup to full throttle, without a transition
- Reset: orientation eg cutting works is wrong, this can be no more then Hitch
- Grass and straw swaths should be even fuller
- NH TC 5.90: Missing texture in the field of straw ejection image
- Liebherr TL: display appears at a certain point of view through the window image
- Grimme Rootster: lowAttacher wanders while on and off up / down
- Jenz HEM: crane can be moved into chopper housing image
- NH T9.565: dirt particle system is in the upper area of the exhaust Wrong image
- Engine: At night the shadows run counterclockwise (as LS13)
- Self Propelled: circuit work Headlamps wrong (only low beam, then working lights)
- Sampo Comia: Double occupancy for pipe exit and straw storage (gamepad)
- Info menu: You can not see the finances of the last days, therefore you do not know how high interest rates on loans and income from milk are / were



Legend:

- Green = Fixed / appear in the next patch
- Black = still open
- Red = not reproducible / from the manufacturer is not desirable / our part so willed / is not resolved (no final statement !!)


Re: [LS15] Reported Bugs - Summary

by MadMax »Fri Oct 31


WIP # 2:

- MP: High Pressure Cleaner Hud display in the "R" remains when boarding the vehicle with high-pressure cleaner.
- MP: Stepa FHL 13 - If you lower the crane in Mp fidgets the gripper.
- MP: Weather forecast temperature at 0 degrees every day
- MP: Kuhn Mowers particles not visible
- MP: New Holland T6 + New Holland 1290 bale Bigbaler come out wrong
- Amazone UF 1801 - helpers do wrong tropic.
- MP server crashes, one after the other if you buy all three chainsaws and these are used by the 3 players
- Mirrors in New Holland T6.160 & Lamborghini Mach 230 VRT not available, only show the soil in
Save camera settings for each vehicle--
- Controller: Nevertheless show the keyboard layout, if there is no availability for Game Controllers
- Kuhn FC 10030, Pottinger Top 1252 Kuhn GA 8521, Krone Swadro 2000 jump in the lowered position
- Krampe SB 30/60 - Fillvolumen shines through on both sides
- New Holland TC 5.90 + Capello quasar F4 - If during the harvest Pans gets off the ladder into the corn head
- Case IH Axial Flow 7130 grain tank is full tilt towards the front, although the screw to the left side raises
- Puma 203 hp (instead of 160 hp), Magnum 380 435 hp (instead of 380 hp) and quad track it would be 692 hp (standard 620 hp)
- Time bonus missions / 'demands clearly too much
- New Holland Headers missing when rape shows the animation
- New Holland T6.160 & Huerlimann XM 130 T4I - flickers mirror surface on the right side mirror
- New Holland T4.75 too easily on the rear axle. Tilts with full FL blade forward without counterweight
- Brantner E 8041 invisible collision on the upper edge over the entire loading area
- Drescher & cutting works No dust animation threshing
- Grimme Tectron 415 conveyor belt has no inside

[gerbiepiep]

That is one huge list.

[tobimobi]

The Grimme Rootster has a graphical glitch. The beets falls through the tank/hopper.

[xirnbruaddict]

The Grimme Rootster has a graphical glitch. The beets falls through the tank/hopper.

like a Dirty little sugar beet harvester lol

the notes have confused me sorry but i dont understand what is fixed and what is not

[farmallfrenzy]

Green text is what they already fixed. Black text is still open issues. And red text is either working as intended or they still haven't decided what to do. And the WIP posts seem to show the contents of the next update. That's how I read it. They've fixed a ton of stuff already!

How many patches did '13 have? 3 or 4 right? By the final update they had most of the outstanding issues straightened out. Could be a few updates till all of the major things get addressed but I have faith

[xirnbruaddict]

Green text is what they already fixed. Black text is still open issues. And red text is either working as intended or they still haven't decided what to do. And the WIP posts seem to show the contents of the next update. That's how I read it. They've fixed a ton of stuff already!

How many patches did '13 have? 3 or 4 right? By the final update they had most of the outstanding issues straightened out. Could be a few updates till all of the major things get addressed but I have faith

Thanks for clearing that up

[MButterfly]

And thus, my brain explodes while reading over that list. That sounds like a lot of work , but I'm glad they are tackling it.

[ThaRebel]

I can't find the part where they wanna improve the multiplayer logging/lagging. Is it in the list, somewhere hidden?