cruise control

[rikor420]

Ok i am confused, number 3 is cruise control where is 1 and 2, driving these tractors is crazy cant control them to easy and when you go forward and the speed is maxed out I cant break to well, i am slamming into other vehicles and trees, ok I think i am done ranting.

thanks.
rikor420

[DukaSoft]

1 and 2 are used to control the cruise control
1 decrease the speed
2 increase the speed

[Gazer75]

You can also set the speed before engaging the cruise control.

If you have it set for following a combine at low speed you can press and hold 3 to make it jump to full speed temporarily. Nice for when you want to drive off to empty trailer.

[rikor420]

thanks, is there a indicator on what level is the increase and decrease on 1 and 2?

[Gazer75]

The selected cruise speed should display in the lower right corner below current speed iirc.

[rikor420]

thanks

[Rickenbacker]

1 = decrease cruise control speed (either before engaging CC, or when it's on)
2 = increase cruise control speed (either before engaging CC, or when it's on)
3 = activate/deactivate cruise control. Hold 3 to engage CC at full speed. When driving at full speed, hit 3 again to return to the pre-set speed.

[danielhawkins]

If you have it set for following a combine at low speed you can press and hold 3 to make it jump to full speed temporarily. Nice for when you want to drive off to empty trailer.

Never knew that. Will use it more often now.