Tractor hp a lil help.

[pedrochapps]

im trying to figure out how to give my tractor 165hp with a speed of 35kmh and rpm of 2400 can anyone help me on this my brain is melted from trying to get it

this is what i have at the moment which is 204-205 hp
motor torqueScale="0.792" minRpm="1000" maxRpm="2400" maxBackwardSpeed="12" brakeForce="3.5" lowBrakeForceScale="0.5" lowBrakeForceSpeedLimit="1" minForwardGearRatio="25" maxForwardGearRatio="130" minBackwardGearRatio="20.7" maxBackwardGearRatio="130"

I have the speed sorted.

changing Motor TorqueScale will change the hp but when i lower it the tractor takes a shot lifetime to get up to speed is is there a way to fix that so it takes off normally ?

[thunderhawk]

you should also have lines showing this below

<motor torqueScale="1.5" minRpm="1000" maxRpm="2200" maxBackwardSpeed="15" brakeForce="15" lowBrakeForceScale="0.5" lowBrakeForceSpeedLimit="1" minForwardGearRatio="16" maxForwardGearRatio="130" minBackwardGearRatio="50" maxBackwardGearRatio="130">
<torque normRpm="0.45" torque="0.9"/>
<torque normRpm="0.5" torque="0.97"/>
<torque normRpm="0.59" torque="1"/>
<torque normRpm="0.72" torque="1"/>
<torque normRpm="0.86" torque="0.88"/>
<torque normRpm="1" torque="0.72"/>
</motor>

Now That You Brought Your HP Down To Where you Wanted It The Torque Is To Low Though out The Power Band Iv Only Messed With this A Little bit to work the way I wanted but there is some downloadable calculators iv seen on mod hub that you can enter the desired HP and get these figures but iv not tried them I just Done My Own Messing Around And Got the take off set the way I wanted by messing with the last torque numbers esc <torque normRpm="1" torque="0.72"/> to <torque normRpm="1" torque="1.44"/> NOTE I'm pretty sure this will counter act your Desired Hp But Again this is not something I have fooled with a lot but this was the way I fixed mine

[pedrochapps]

Thanks for that Thunderhawk I will play with that and see how i get on.