[FS19] Patch 1.1.3 beta
Re: [FS19] Patch 1.1.3 beta
So far still no fix regarding the side panel's button 28 + axis movement on the joystick for "Extend / Retract" loader boom.
Re: [FS19] Patch 1.1.3 beta
goin back to 1.1 .
logitech g27 is locked to 180 degrees rotation no matter what settings i ve applyed in logitech profiler.
at least with 1.1 i run fs 17 unlock the wheel and then open fs19 and i can play
logitech g27 is locked to 180 degrees rotation no matter what settings i ve applyed in logitech profiler.
at least with 1.1 i run fs 17 unlock the wheel and then open fs19 and i can play
Re: [FS19] Patch 1.1.3 beta
Will there be a fix for the joystick? Works now no problem but when I assign the axis for up and down they both come up as positive instead of + & - axis?
Re: [FS19] Patch 1.1.3 beta
The wheel works relatively good now (G920). The only issue is I have to tab out / tab in the game to get the setting from the logitech profiler.
ANd I can't still assign key combinaison or a same key for two function.
ANd I can't still assign key combinaison or a same key for two function.
Has been dairy farmer - From Quebec, Canada
French is my first language, please excuse my English
French is my first language, please excuse my English
-
- Posts: 9
- Joined: Fri Oct 24, 2014 5:09 am
Re: [FS19] Patch 1.1.3 beta
So is the 1.1.3 beta patch available to Mac users? We still haven't gotten the 1.1.2 patch. Thanks.
- TacoFarmer
- Posts: 3666
- Joined: Wed May 24, 2017 8:55 pm
- Location: TBAP Ranch,PS4
Re: [FS19] Patch 1.1.3 beta
PS4
Farm Happy My Friends.
WestBridge Hills-EL Bubbling FartZ Rancho Edition
You cant polish a turd ......but you can paint it GREEN and YELLOW .
Farm Happy My Friends.
WestBridge Hills-EL Bubbling FartZ Rancho Edition
You cant polish a turd ......but you can paint it GREEN and YELLOW .
-
- Posts: 425
- Joined: Sat Feb 24, 2018 4:52 pm
- Location: Southeastern USA
Re: [FS19] Patch 1.1.3 beta
Just look at it this way: Windows players are the guinea pigs and you will get the finished product later.annasgramma wrote: ↑Wed Nov 28, 2018 10:14 pm Still no solution for us MAC players!! .exe does not work on MAC. We need .dmg!! And the waiting patiently continues!!
But, if you really want to join in, you can always Bootcamp a Windows installation on your Mac. Then you can run the PC/Windows version and opt for the beta. (I do this on my MacBook in order to run Windows-only games, and even FS. It works very well.)
Re: [FS19] Patch 1.1.3 beta
in v1.1.0 I had a G27 and a Microsoft FFB2 joystick that would work perfectly after some hand editing of the generated inputBinding.xml and the tagging it read-only, so FS19 cant overwrite it and sorting out the absolute mess that the LogitechG27.xml was.
for the past 9 days I have been enjoying using both together and would have to do NOTHING upon starting FS19, just as I had in FS17, FS15 and FS13, whatever settings I set via joy.cpl for the wheel would be used without question by FS19.
try's v1.1.3, takes the time to remap keys via the key binding GUI (having deleted the v1.1.0 inputBinding.xml and using the v1.1.3 LogitechG27.xml) only to be faced with once playing my MS FFB2 joystick now has NO centring force whatsoever (unless I tab out of FS19 upon which the centring force returns, but on returning back to FS19 it goes again), while my G27 now starts with 180deg of wheel rotation regardless of what is set in joy.cpl, which means I now have to tab out of FS19 and run joy.cpl and go into the G27 settings (without changing anything just merely entering the setting page) then exiting and going back to FS19 before FS19 will respect the settings of the G27 even though IT WAS SET BEFORE FS19 WAS LAUNCHED, and to cap it off, I still have to hand edit the inputBinding.xml to removed the bindings that cannot be removed via the key binding GUI, and I still have to replace the LogitechG27.xml with my edited one to have any semblance of logical ordering and naming of buttons.
and even when I make an xml in the \Farming Simulator 2019\shared\inputDevices\ folder for the joystick to get around the "unknown" device cat to get "Name: SideWinder Force Feedback 2 Joystick(VID: 045E PID: 001B VER: 0A00 Cat: JOYSTICK)" in the log.txt it is still without centring.
so v1.1.3 to me is nothing more than a joke with respect to my G27 wheel and Microsoft FFB2 joystick and it's 200%(*) worse than v1.1.0
(*) 100% per device it has made worse vs v1.1.0.
BTW: like many people I DONT run the Logitech Profiler, it is a superfluous bit of software that doesn't need to be running and has NOT been needed for the past 8 years since its launch, given ALL the wheel settings can be changed via joy.cpl, and so long as it has been installed you have the G27 drivers.
for the past 9 days I have been enjoying using both together and would have to do NOTHING upon starting FS19, just as I had in FS17, FS15 and FS13, whatever settings I set via joy.cpl for the wheel would be used without question by FS19.
try's v1.1.3, takes the time to remap keys via the key binding GUI (having deleted the v1.1.0 inputBinding.xml and using the v1.1.3 LogitechG27.xml) only to be faced with once playing my MS FFB2 joystick now has NO centring force whatsoever (unless I tab out of FS19 upon which the centring force returns, but on returning back to FS19 it goes again), while my G27 now starts with 180deg of wheel rotation regardless of what is set in joy.cpl, which means I now have to tab out of FS19 and run joy.cpl and go into the G27 settings (without changing anything just merely entering the setting page) then exiting and going back to FS19 before FS19 will respect the settings of the G27 even though IT WAS SET BEFORE FS19 WAS LAUNCHED, and to cap it off, I still have to hand edit the inputBinding.xml to removed the bindings that cannot be removed via the key binding GUI, and I still have to replace the LogitechG27.xml with my edited one to have any semblance of logical ordering and naming of buttons.
and even when I make an xml in the \Farming Simulator 2019\shared\inputDevices\ folder for the joystick to get around the "unknown" device cat to get "Name: SideWinder Force Feedback 2 Joystick(VID: 045E PID: 001B VER: 0A00 Cat: JOYSTICK)" in the log.txt it is still without centring.
so v1.1.3 to me is nothing more than a joke with respect to my G27 wheel and Microsoft FFB2 joystick and it's 200%(*) worse than v1.1.0
(*) 100% per device it has made worse vs v1.1.0.
BTW: like many people I DONT run the Logitech Profiler, it is a superfluous bit of software that doesn't need to be running and has NOT been needed for the past 8 years since its launch, given ALL the wheel settings can be changed via joy.cpl, and so long as it has been installed you have the G27 drivers.
plays FS15/FS17/FS19/FS22 on PC
-
- Posts: 12
- Joined: Mon Nov 19, 2018 6:51 pm
Re: [FS19] Patch 1.1.3 beta
When does console get an update seems pc if getting all the fixes
Re: [FS19] Patch 1.1.3 beta
Are the fixes above relevant to console? for the most part, no. Besides, these are beta patches. Once Giants pulls them out of beta and they are relevant to consoles, you will get an update.
- BobcatLogger
- Posts: 164
- Joined: Wed Apr 05, 2017 12:55 pm
Re: [FS19] Patch 1.1.3 beta
Will the auto center be fixed to work with other imputs other than just keyboards? Like having the adjustment for it but would like it to affect the steering with controllers as well.
Bobcat Logger YouTube - https://www.youtube.com/channel/UCNNKuw ... TXH4YbyOpg
Re: [FS19] Patch 1.1.3 beta
In FS17 I was able to change the sensitivity of my Xbox controller to 0.75 (75%) in the xml file for all the axes, since this is not possible in game. It remembered this while saving the game. I’m on patch 1.1.3 beta now and I’m able to change the sensitivity values for axis 0 to axis 3 and these remain the same after restarting the game. However, axis 5 and 6 don’t exist in the xml, and when I add them the game doesn’t do anything with it.
Anyone had a workaround already? Or is this something that’s going to be fixed?
Anyone had a workaround already? Or is this something that’s going to be fixed?
Re: [FS19] Patch 1.1.3 beta
The two trigger axes of the Xbox controller are called 10 and 11 in the xml (and 11 and 12 in the gui)
Re: [FS19] Patch 1.1.3 beta
Hi Stegei,
Thanks a lot, going to try this afternoon. Keep up the good work!
Janjaap
Thanks a lot, going to try this afternoon. Keep up the good work!
Janjaap
Re: [FS19] Patch 1.1.3 beta
hello
platform PC Steam
Hired worker ( H key ) not working.
and not vissebley in F1 menu
grt
yib
platform PC Steam
Hired worker ( H key ) not working.
and not vissebley in F1 menu
grt
yib