[FS19] Hotfix 1.1.3 - 29/11/2018

SHNOOKER
Posts: 1
Joined: Wed Apr 26, 2017 4:04 am

Re: [FS19] Hotfix 1.1.3 - 29/11/2018

Post by SHNOOKER » Mon Dec 03, 2018 11:22 am

I have a G29 before the patch 1.1.3 my wheel was working now it does not I have no force feedback and also no return on the steering it"s like my steering was turned off and have a dead stick I have updated my drivers re-installed everything and it still does not work I reset the controls and still does not work what did you do ?

shnooker

RMZguy151
Posts: 3
Joined: Sat Dec 01, 2018 10:01 pm

Re: [FS19] Hotfix 1.1.3 - 29/11/2018

Post by RMZguy151 » Tue Dec 04, 2018 2:42 am

I have the disc version, how do I download this and apply it to the game?

parad0x177
Posts: 362
Joined: Sat Feb 24, 2018 4:52 pm
Location: Southeastern USA

Re: [FS19] Hotfix 1.1.3 - 29/11/2018

Post by parad0x177 » Tue Dec 04, 2018 2:58 am

RMZguy151 wrote:
Tue Dec 04, 2018 2:42 am
I have the disc version, how do I download this and apply it to the game?
Go to the Farming Simulator website. Click “Updates” at the top. Download the update. Run the update. Done. :wink3:

RMZguy151
Posts: 3
Joined: Sat Dec 01, 2018 10:01 pm

Re: [FS19] Hotfix 1.1.3 - 29/11/2018

Post by RMZguy151 » Tue Dec 04, 2018 6:27 am

parad0x177 wrote:
Tue Dec 04, 2018 2:58 am
RMZguy151 wrote:
Tue Dec 04, 2018 2:42 am
I have the disc version, how do I download this and apply it to the game?
Go to the Farming Simulator website. Click “Updates” at the top. Download the update. Run the update. Done. :wink3:
Every time I try that it gets to like 99% and says the download could not be completed.

Sam Forest
Posts: 3
Joined: Sat Nov 17, 2018 9:51 pm

Re: [FS19] Hotfix 1.1.3 - 29/11/2018

Post by Sam Forest » Tue Dec 04, 2018 10:21 am

Randys1214 wrote:
Thu Nov 29, 2018 4:47 pm
Still having problems with the G920 forcefeed back. It loosens up on the main menu but if im in game and tab out of the game. Its stiff again and wont loosen up until i go all the way back to the main menu.
Are you using the Logitech Gaming Software tool? If you want it to work correctly, you have to download it. I had no problems at all with my G29 :hmm:
Seit Ls09 dabei, sammle von den Hühnern jedes Ei,
wenn der Fendt am Acker schwitzt
freu ich mich auf meinem Sitz!
Steht der Schlepper dann mal in der Halle,
wird der Geldbeutel nicht pralle :lol:

levicfoley
Posts: 7
Joined: Wed Nov 21, 2018 11:01 pm

Re: [FS19] Hotfix 1.1.3 - 29/11/2018

Post by levicfoley » Wed Dec 05, 2018 9:35 am

I feel the game should have been more thoroughly tested before release.
almost every large planter is bugged and 2 of the 3 bale moving implements lock onto the bales you have just unloaded after you pull away and fold implement horses disappear and will crash dedicated servers pigs disappear in mp.
basically if it does not have green paint it dont work right.
very disappointed in the attention given to getting deere in game correctly and neglecting all other brands.
A prime example is new holland t.9 its purchasable with tracks from new holland as well as a nearly 700 hp engine, but is nowhere to be found in fs15 fs17 or fs19.
I'm happy deere is in the game finally but I would like to see updated equipment in new holland case ih massey challenger ect as well as correctly functioning game. so far I'm unhappy but once the bugs are worked out it will be another great game from giants :hmm: :search: :confusednew:

User avatar
theSeb
Posts: 839
Joined: Tue Mar 07, 2017 8:16 pm

Re: [FS19] Hotfix 1.1.3 - 29/11/2018

Post by theSeb » Wed Dec 05, 2018 11:03 am

Image

Is your concern that you want it to be with tracks and bigger engine options? The Case is there for that. And they are the exact same products from CNH with badge engineering. So I guess Giants didn't feel the need to offer the T9 with the same options as the Case Quadtrack
http://www.realismusmodding.com

First
Like if you agree

BigC92
Posts: 4702
Joined: Tue Mar 17, 2015 5:25 pm

Re: [FS19] Hotfix 1.1.3 - 29/11/2018

Post by BigC92 » Wed Dec 05, 2018 11:13 am

Im disappointed that the tracks aint 3D.

User avatar
RODHA
Posts: 4545
Joined: Wed Dec 28, 2016 12:41 pm

Re: [FS19] Hotfix 1.1.3 - 29/11/2018

Post by RODHA » Wed Dec 05, 2018 12:34 pm

theSeb wrote:
Wed Dec 05, 2018 11:03 am
And they are the exact same products from CNH with badge engineering.
I have to oppose to that. Because badge engineering is exactly what we see with the ideal combine. Fendt, Massey or Challenger. It is the exact same machine.

But T9 and Quadtrac are quite different. Yes they use a lot of shared parts like Seat, Skoda and VW cars do but they are absolutely not the same machine which you can call badge engineering. They were closer in the early models but over the years they got separated quite a bit.

Please note though, those are definitely not the educated comments of a professional.
I'm talking based on the videos I watched and blogs/articles I read over the years.

So, I also was very hopeful that we would get the latest updates on the T9 with FS19 but I'm really disappointed at the end.

I just hope a modder may decide to make the best of the best out of the T9.
PS4 / FS19

User avatar
theSeb
Posts: 839
Joined: Tue Mar 07, 2017 8:16 pm

Re: [FS19] Hotfix 1.1.3 - 29/11/2018

Post by theSeb » Wed Dec 05, 2018 12:42 pm

RODHA wrote:
Wed Dec 05, 2018 12:34 pm
theSeb wrote:
Wed Dec 05, 2018 11:03 am
And they are the exact same products from CNH with badge engineering.
I have to oppose to that. Because badge engineering is exactly what we see with the ideal combine. Fendt, Massey or Challenger. It is the exact same machine.

But T9 and Quadtrac are quite different. Yes they use a lot of shared parts like Seat, Skoda and VW cars do but they are absolutely not the same machine which you can call badge engineering. They were closer in the early models but over the years they got separated quite a bit.

Please note though, those are definitely not the educated comments of a professional.
I'm talking based on the videos I watched and blogs/articles I read over the years.

So, I also was very hopeful that we would get the latest updates on the T9 with FS19 but I'm really disappointed at the end.

I just hope a modder may decide to make the best of the best out of the T9.
It's the same machine underneath. Case / New Holland tractors look different, but they share the mechanicals. It makes sense for a big company to do this.
http://www.realismusmodding.com

First
Like if you agree

User avatar
RODHA
Posts: 4545
Joined: Wed Dec 28, 2016 12:41 pm

Re: [FS19] Hotfix 1.1.3 - 29/11/2018

Post by RODHA » Wed Dec 05, 2018 1:15 pm

True. It is really a logical call for cost savings.
And they do share a lot of parts, especially on the "under pinnings" side of things as you said but they are really not an example for badge engineering.
Thats why I was hoping to get the latest T9 version.
Besides, T9 always looks hell of a lot cooler than the Quadtrac :biggrin2: :coolnew:
I hope I don't make the red fans angry :confused2: :biggrin2:
PS4 / FS19

User avatar
vondeylenfarms
Posts: 601
Joined: Sat Oct 10, 2015 11:53 pm
Location: USA, Ohio

Re: [FS19] Hotfix 1.1.3 - 29/11/2018

Post by vondeylenfarms » Wed Dec 05, 2018 10:08 pm

I see why Giants did that with the T9 and Case Quad...but maybe they will let a modder do it? Actually allow it I mean? Also maybe add the option for row tracks on the Quad
Vondeylen Farms Ohio, U.S.
1000 acres, family farm, huge Case IH guy(however not racist we own some green :coolnew: )

Platform-PS4

marc1891
Posts: 10
Joined: Sun Nov 25, 2018 9:42 pm

Re: [FS19] Hotfix 1.1.3 - 29/11/2018

Post by marc1891 » Wed Dec 05, 2018 11:56 pm

but for fanatec pedal,no solutions?

Randys1214
Posts: 16
Joined: Wed Nov 21, 2018 2:04 am

Re: [FS19] Hotfix 1.1.3 - 29/11/2018

Post by Randys1214 » Mon Dec 10, 2018 4:50 pm

Sam Forest wrote:
Tue Dec 04, 2018 10:21 am
Randys1214 wrote:
Thu Nov 29, 2018 4:47 pm
Still having problems with the G920 forcefeed back. It loosens up on the main menu but if im in game and tab out of the game. Its stiff again and wont loosen up until i go all the way back to the main menu.
Are you using the Logitech Gaming Software tool? If you want it to work correctly, you have to download it. I had no problems at all with my G29 :hmm:
Yes i am, forcefeed back is perfect until i minimize the game and go back.

Cowboy5130
Posts: 321
Joined: Thu Sep 13, 2018 7:16 pm

Re: [FS19] Hotfix 1.1.3 - 29/11/2018

Post by Cowboy5130 » Thu Dec 20, 2018 2:26 am

theSeb wrote:
Wed Dec 05, 2018 11:03 am
Image

Is your concern that you want it to be with tracks and bigger engine options? The Case is there for that. And they are the exact same products from CNH with badge engineering. So I guess Giants didn't feel the need to offer the T9 with the same options as the Case Quadtrack
Or vice versa since we can’t get wheels on the Steiger...I was really hoping this might be the version I could get duals on it. :(
Ps4 realistic gameplay;
Ravenport start-from-scratch;
Absolutely love the game!

Locked