Hallo
Habe bei dem 800 vario den 824 hinzugefügt als motor konfiguration.
Im spiel erscheint er auch ganz normal als auswahl.
Mein Problem ist das ich auf der motor haube noch keine typenbezeichnugn habe.
Habe alle verfügbaren, also 822 826 828 unsichtbar gestellt.
Wie bekomme ich jetz die 824 auf die mtorhaube ?
Was muss ich da an parametern bzw in der i3d ändern damit er mit 824er logo erscheint ?
Irgendwie muss ich ja eine 3 konfiguration in die objekt change bekommen.
Danke schon mal.
XML sieht wie folgt aus:
<motorConfigurations>
<motorConfiguration name="822 Vario" hp="220" price="0">
<motor torqueScale="0.7857" minRpm="900" maxRpm="2100" maxForwardSpeed="63" maxBackwardSpeed="22" brakeForce="13.5" lowBrakeForceScale="0.22" lowBrakeForceSpeedLimit="1" rotInertia="0.0015" minForwardGearRatio="10.2" maxForwardGearRatio="250" minBackwardGearRatio="37" maxBackwardGearRatio="250">
<torque normRpm="0.42" torque="1"/>
<torque normRpm="0.47" torque="1.19"/>
<torque normRpm="0.52" torque="1.14"/>
<torque normRpm="0.57" torque="1.175"/>
<torque normRpm="0.61" torque="1.2"/>
<torque normRpm="0.67" torque="1.2"/>
<torque normRpm="0.71" torque="1.19"/>
<torque normRpm="0.76" torque="1.16"/>
<torque normRpm="0.8" torque="1.1"/>
<torque normRpm="0.86" torque="1.05"/>
<torque normRpm="0.9" torque="1"/>
<torque normRpm="0.95" torque="0.94"/>
<torque normRpm="1" torque="0.9"/>
</motor>
<objectChange node="0>12|0|0" visibilityActive="true"/>
<objectChange node="0>12|0|1" visibilityActive="false"/>
<objectChange node="0>12|0|2" visibilityActive="false"/>
</motorConfiguration>
<motorConfiguration name="824 Vario" hp="240" price="15000" dailyUpkeep="30" icon="$dataS2/menu/hud/configurations/config_engine.png">
<motor torqueScale="0.9285" />
<objectChange node="0>12|0|0" visibilityActive="false"/>
<objectChange node="0>12|0|1" visibilityActive="false"/>
<objectChange node="0>12|0|2" visibilityActive="false"/>
<objectChange node="0>12|0|3" visibilityActive="true"/>
</motorConfiguration>
<motorConfiguration name="826 Vario" hp="260" price="30000" dailyUpkeep="60" icon="$dataS2/menu/hud/configurations/config_engine.png">
<motor torqueScale="0.8571" />
<objectChange node="0>12|0|0" visibilityActive="false"/>
<objectChange node="0>12|0|1" visibilityActive="true"/>
<objectChange node="0>12|0|2" visibilityActive="false"/>
</motorConfiguration>
<motorConfiguration name="828 Vario" hp="280" price="45000" dailyUpkeep="90" icon="$dataS2/menu/hud/configurations/config_engine.png">
<motor torqueScale="1" />
<objectChange node="0>12|0|0" visibilityActive="false"/>
<objectChange node="0>12|0|1" visibilityActive="false"/>
<objectChange node="0>12|0|2" visibilityActive="true"/>
</motorConfiguration>
</motorConfigurations>
motorkonfiguration hinzufügen
5 posts
Page 1 of 1
Re: motorkonfiguration hinzufügen
schau dir das i3d Modell an, da ist für jede Typenbezeichnung ein Objekt vorhanden und so eins brauchst du auch für den 824.
Re: motorkonfiguration hinzufügen
die hab ich gefunden.
aber wie änder bzw füge ich da was ein ?
aber wie änder bzw füge ich da was ein ?
Re: motorkonfiguration hinzufügen
da muss ein neuer Schriftzug erstellt werden
Re: motorkonfiguration hinzufügen
ok. das übesteigt mein können
5 posts
Page 1 of 1