Jenz HEM 583 Z - Can't turn on, even with a Challenger MT800.

Ignallis
Posts: 2
Joined: Mon Feb 05, 2018 12:40 am

Jenz HEM 583 Z - Can't turn on, even with a Challenger MT800.

Post by Ignallis »

I've been trying to do some wood chipping on my PS4 save of Goldcrest. Ever since I bought the HEM 583 Z from Jenz, I've been unable to turn it on, even when I use a Challenger MT800 with 875 motor option, or with one of the 900hp Oshkosh trucks I have. Is there a certain thing I'm forgetting? God honestly clueless at this point.
User avatar
redglasses
Posts: 5909
Joined: Fri Jan 27, 2017 7:01 pm
Location: Farming land, Canada

Re: Jenz HEM 583 Z - Can't turn on, even with a Challenger MT800.

Post by redglasses »

Did you un-fold it? Can you use the crane? Is the tractor on?
Playing Lincoln Creek on PC
Upload your screenshots here: IMG server
My Discord
Remember there is no need to spread your manure around the forums :wink3:
Jack of all trades, master of the skid steer
Squirrel2004_448
Posts: 31
Joined: Fri Dec 01, 2017 6:20 pm

Re: Jenz HEM 583 Z - Can't turn on, even with a Challenger MT800.

Post by Squirrel2004_448 »

Did you unfold the pipe, and start the motor then turn the woodchipper on
Ignallis
Posts: 2
Joined: Mon Feb 05, 2018 12:40 am

Re: Jenz HEM 583 Z - Can't turn on, even with a Challenger MT800.

Post by Ignallis »

I unfolded the pipe, turned on the tractor, and am able to use the arm. When cycling through the control menu for the machine, I see nothing that says anything about turning on the chipper
User avatar
Azfoor
Posts: 635
Joined: Mon Jul 31, 2017 1:05 am
Location: Sweden

Re: Jenz HEM 583 Z - Can't turn on, even with a Challenger MT800.

Post by Azfoor »

You need to unfold the "table" where you feed the chipper. unfold table using L1-X, then turn on using L1-square.
User avatar
SimulatedSphere
Posts: 726
Joined: Wed Aug 02, 2017 2:48 pm
Location: Next Door To You!
Contact:

Re: Jenz HEM 583 Z - Can't turn on, even with a Challenger MT800.

Post by SimulatedSphere »

When it detects wood near it , it will turn on by itself I think . Otherwise , you might require a trailer.
XBOX ONE S ( I don't have limited power :biggrin2: )| FS17 | UK
Just waiting for FS19!
I play with as much realism as possible :wink3:
XBOX ONE S ¦ On Estancia / Sussex Farm / Oakfield |FS13 , FS15 , FS17
Thank you to all modders out there , the game would never be the same without you!😎 :hi:
Thank you to Giants as my Xbox would never be the same without you!😎 :hi:
User avatar
W1der
Posts: 3795
Joined: Wed Jan 13, 2016 7:53 pm
Location: SWEDEN

Re: Jenz HEM 583 Z - Can't turn on, even with a Challenger MT800.

Post by W1der »

You most probably did not "select" the chipper ... (see attached image - orange marking in bottom right corner of image)
Everything can be controlled without doing this, except turning it on.

Image
[Win11] Intel Core i9-13900F Tray 5.6GHz / MSI RTX4090 24GB GDDR6 / 2x16GB 5600MHz DDR5
User avatar
redglasses
Posts: 5909
Joined: Fri Jan 27, 2017 7:01 pm
Location: Farming land, Canada

Re: Jenz HEM 583 Z - Can't turn on, even with a Challenger MT800.

Post by redglasses »

Ya you also need to unfold it. Here is the process:
Unfold chipper, unfold the pipe, turn on, and make sure the tipper is near the pipe.
Playing Lincoln Creek on PC
Upload your screenshots here: IMG server
My Discord
Remember there is no need to spread your manure around the forums :wink3:
Jack of all trades, master of the skid steer
Post Reply