acceleration

[sparangao]

what values ​​should be modified to decrease the acceleration of the truck?

all the trucks have the defect that they accelerate too quickly
I changed these but did not work

motorConfigurations>
<motorConfiguration name="STAGE I" hp="600" price="0">
<motor torqueScale="2.033" minRpm="1000" maxRpm="3500" maxForwardSpeed="83" maxBackwardSpeed="15" brakeForce="9" lowBrakeForceScale="0.22" lowBrakeForceSpeedLimit="1" rotInertia="0.0015" minForwardGearRatio="9.8" maxForwardGearRatio="250" minBackwardGearRatio="40" maxBackwardGearRatio="250">
<torque normRpm="0.10" torque="1.0"/>
<torque normRpm="0.20" torque="1.5"/>
<torque normRpm="0.30" torque="2.0"/>
<torque normRpm="0.40" torque="2.5"/>
<torque normRpm="0.45" torque="3.2"/>
<torque normRpm="0.5" torque="3.55"/>
<torque normRpm="0.59" torque="3.2"/>
<torque normRpm="0.72" torque="2.5"/>
<torque normRpm="0.86" torque="2.0"/>
<torque normRpm="1" torque="1.5"/>
</motor>

[novass]

you know on fs13 the tractors..I don't know about the trucks..if there was any..its been awhile..all need to accelerate better..its to fast on 15 ,17 but that ford/chev pickup is the worsed one..its so bad I won't use it...I hope you get somewhere with this...they all need some change.....Chris
l

[Hairy Bob]

Try decreasing the max forward gear ratio, I'd try it around 100 to start with, and fine tune it from there. Do the same with the max backward gear ratio if you find it reverses too fast.