Hi folks, I need some advice from some modding experts.
I've downloaded a plow mod, it is not a big one, but average tractors cannot pull it faster than 5 km/h. I'd like to change that.
The speed limit in the xml file is 15 km/h, so the problem is elsewhere.
I tried to decrease to plow's Density in the i3d file to lower its weight (from 1 to 0.1 and 0.5) , but then it was "jumping" out of the ground all the time. So the problem seem to be now that the soil has too much resistance on the shanks compared to its mass, it pushes the plow out of the ground.
Is there a way to make it work? It's a small plow, it really shouldn't need 500 hp to pull.
Thanks in advance.
Plow weight - help needed
4 posts
Page 1 of 1
- SpecialGuest
- Posts: 31
- Joined: Fri Feb 02, 2018 8:08 pm
Plow weight - help needed
Agriculture basically has four major problems every year: spring, summer, autumn, and winter.
- BenGerlach
- Posts: 27
- Joined: Fri Feb 09, 2018 6:41 pm
Re: Plow weight - help needed
can you send me the link
if you don't know what Spotted Cow is, you haven't had a good beer.
- SpecialGuest
- Posts: 31
- Joined: Fri Feb 02, 2018 8:08 pm
Re: Plow weight - help needed
Sorry I can't remeber where is it exactly from, but it's called John Deere 915 ripper. It contains two plows, and it's the bigger one.
Agriculture basically has four major problems every year: spring, summer, autumn, and winter.
Re: Plow weight - help needed
Is it this one? https://www.deere.com/en/tillage/915-v-ripper/
Looks like a pretty big ripper with a pretty big tractor pulling it to me...
If you're after a big plough that's easy to pull, look for the Horsch cultiplow by Stevie. It's 10m wide and works well enough with 250+hp on the front.
Sorry, I can't help with your issue. I tried to edit the cultiplow the other way, to make it harder to pull as it just seems too easy for it's size, but it's beyond me!
Looks like a pretty big ripper with a pretty big tractor pulling it to me...
If you're after a big plough that's easy to pull, look for the Horsch cultiplow by Stevie. It's 10m wide and works well enough with 250+hp on the front.
Sorry, I can't help with your issue. I tried to edit the cultiplow the other way, to make it harder to pull as it just seems too easy for it's size, but it's beyond me!
Farming Kandelin and Pellworm on pc
4 posts
Page 1 of 1