My WIP Thread
- ClassicTractors
- Posts: 986
- Joined: Sat Oct 29, 2016 11:07 pm
- Contact:
My WIP Thread
I have decided to venture into the world of modding. I am still learning, so please don't ask for updates as I will have to learn as I go along. This is my official WIP thread, so I will update it as I complete or start more mods.
[WIP] - Gooseneck Trailer - Approximately 40 ft - Began 3-D model. I'm thinking this may have two separate versions: one with ramps and one with ramps and a winch to winch vehicles onto the trailer.
[WIP] - New Holland 6610 - Started basics. I will work on it throughout the coming months as I learn more advanced Blender features.
Planned:
[Planned] - Flatbed Semi Trailer - American and Euro Style
[Planned] - Bottom Dump Grain Trailers
[Planned] - Ford 9700
[Planned] - Ford 2810
The tractors will still be months away because I am still learning everything. I have decided to start with simple mods and progressively work my way up to the more complex mods (tractors, trucks, etc).
[WIP] - Gooseneck Trailer - Approximately 40 ft - Began 3-D model. I'm thinking this may have two separate versions: one with ramps and one with ramps and a winch to winch vehicles onto the trailer.
[WIP] - New Holland 6610 - Started basics. I will work on it throughout the coming months as I learn more advanced Blender features.
Planned:
[Planned] - Flatbed Semi Trailer - American and Euro Style
[Planned] - Bottom Dump Grain Trailers
[Planned] - Ford 9700
[Planned] - Ford 2810
The tractors will still be months away because I am still learning everything. I have decided to start with simple mods and progressively work my way up to the more complex mods (tractors, trucks, etc).
Last edited by ClassicTractors on Wed Oct 25, 2017 1:14 am, edited 5 times in total.
- ClassicTractors
- Posts: 986
- Joined: Sat Oct 29, 2016 11:07 pm
- Contact:
Re: My WIP Thread
Updated with a planned list as well :)
- redglasses
- Posts: 5909
- Joined: Fri Jan 27, 2017 7:01 pm
- Location: Farming land, Canada
Re: My WIP Thread
Awesome, do you think there is a chance that these will be released to console?
Playing Lincoln Creek on PC
Upload your screenshots here: IMG server
My Discord
Remember there is no need to spread your manure around the forums
Jack of all trades, master of the skid steer
Upload your screenshots here: IMG server
My Discord
Remember there is no need to spread your manure around the forums
Jack of all trades, master of the skid steer
- Smith Modding
- Posts: 2996
- Joined: Sat May 14, 2016 12:42 pm
- Location: Harris County, Georgia
Re: My WIP Thread
Question about this... Will it just be like a pj trailer? Because I was planning on making one and a harvester/spreader trailer to release with the S650 I'm working onClassicTractors wrote: [WIP] - Gooseneck Trailer - Approximately 40 ft - Began 3-D model
Smith Modding Co.
Christian Based Modding
Isaiah 30:23- He will also send you rain for the seed you sow in the ground, and the food that comes from the land will be rich and plentiful. In that day your cattle will graze in broad meadows.:
Playing FS15-19 on PC
Playing too much FS19
Specs-
Christian Based Modding
Isaiah 30:23- He will also send you rain for the seed you sow in the ground, and the food that comes from the land will be rich and plentiful. In that day your cattle will graze in broad meadows.:
Playing FS15-19 on PC
Playing too much FS19
Specs-
- FordFarmer97
- Posts: 3156
- Joined: Fri Jul 28, 2017 2:52 pm
- Location: Clifton, TN
- Contact:
Re: My WIP Thread
9700?!?! 6610?!?! CLASSIC TRACTORS YOU ARE MY HERO!!!!!!!ClassicTractors wrote:I have decided to venture into the world of modding. I am still learning, so please don't ask for updates as I will have to learn as I go along. This is my official WIP thread, so I will update it as I complete or start more mods.
[WIP] - Gooseneck Trailer - Approximately 40 ft - Began 3-D model
Planned:
[Planned] - Flatbed Semi Trailer - American and Euro Style
[Planned] - Bottom Dump Grain Trailers
[Planned] - NH6610
[Planned] - Ford 9700
[Planned] - Large John Deere Tractors
The tractors will still be months away because I am still learning everything. I have decided to start with simple mods and progressively work my way up to the more complex mods (tractors, trucks, etc).
Tryin to make a 9700 Ford mod, one of these days
#LimeGreenPower
Playin on PC in Tennessee!
John 3:16: "For God so loved the world he gave his only begotten son, that whovever shall believeth in him shall not perish, but have everlasting life"
Old Iron Best Iron.
PM me for a Discord link.
#LimeGreenPower
Playin on PC in Tennessee!
John 3:16: "For God so loved the world he gave his only begotten son, that whovever shall believeth in him shall not perish, but have everlasting life"
Old Iron Best Iron.
PM me for a Discord link.
- redglasses
- Posts: 5909
- Joined: Fri Jan 27, 2017 7:01 pm
- Location: Farming land, Canada
Re: My WIP Thread
ohhhhhhhhhhhh a sprayer trailer, and a harvester trailer, ohhhhhhhh I cant wait, that truck will be legendarySmith Modding wrote:Question about this... Will it just be like a pj trailer? Because I was planning on making one and a harvester/spreader trailer to release with the S650 I'm working onClassicTractors wrote: [WIP] - Gooseneck Trailer - Approximately 40 ft - Began 3-D model
Playing Lincoln Creek on PC
Upload your screenshots here: IMG server
My Discord
Remember there is no need to spread your manure around the forums
Jack of all trades, master of the skid steer
Upload your screenshots here: IMG server
My Discord
Remember there is no need to spread your manure around the forums
Jack of all trades, master of the skid steer
- ClassicTractors
- Posts: 986
- Joined: Sat Oct 29, 2016 11:07 pm
- Contact:
Re: My WIP Thread
If I can figure out console, I will try. The only issue will be some of the licensing. I do know that New Holland bought Ford, but I don't know if Ford brand tractors will be allowed in the game under the current license.redglasses wrote:Awesome, do you think there is a chance that these will be released to console?
I was planning on it being like a PJ Trailer. If I can figure out how to upload a screenshot (it says it is in the wrong format), I can show you what it looks like. The only thing different from the PJ Trailer is mine may not have ramps. It will have a dovetail, so I suppose tall enough machines could drive up on it. It will basically be a pallet/bale trailer. You can PM me if you have more questions.Smith Modding wrote:Question about this... Will it just be like a pj trailer? Because I was planning on making one and a harvester/spreader trailer to release with the S650 I'm working onClassicTractors wrote: [WIP] - Gooseneck Trailer - Approximately 40 ft - Began 3-D model
- FordFarmer97
- Posts: 3156
- Joined: Fri Jul 28, 2017 2:52 pm
- Location: Clifton, TN
- Contact:
Re: My WIP Thread
Ford Tractors can't be in-game as far as I know, but the NH 6610 idea should work
Tryin to make a 9700 Ford mod, one of these days
#LimeGreenPower
Playin on PC in Tennessee!
John 3:16: "For God so loved the world he gave his only begotten son, that whovever shall believeth in him shall not perish, but have everlasting life"
Old Iron Best Iron.
PM me for a Discord link.
#LimeGreenPower
Playin on PC in Tennessee!
John 3:16: "For God so loved the world he gave his only begotten son, that whovever shall believeth in him shall not perish, but have everlasting life"
Old Iron Best Iron.
PM me for a Discord link.
- FordFarmer97
- Posts: 3156
- Joined: Fri Jul 28, 2017 2:52 pm
- Location: Clifton, TN
- Contact:
Re: My WIP Thread
Tryin to make a 9700 Ford mod, one of these days
#LimeGreenPower
Playin on PC in Tennessee!
John 3:16: "For God so loved the world he gave his only begotten son, that whovever shall believeth in him shall not perish, but have everlasting life"
Old Iron Best Iron.
PM me for a Discord link.
#LimeGreenPower
Playin on PC in Tennessee!
John 3:16: "For God so loved the world he gave his only begotten son, that whovever shall believeth in him shall not perish, but have everlasting life"
Old Iron Best Iron.
PM me for a Discord link.
Re: My WIP Thread
I was wondering that too classictractors, ford was with NH since i was a kid, this was in the 90's, i think ford was with NH in the 80's too, but they have Ford-New Holland tractors, but like you said, NH bought out Ford, so idk how that would work.
- ClassicTractors
- Posts: 986
- Joined: Sat Oct 29, 2016 11:07 pm
- Contact:
- ClassicTractors
- Posts: 986
- Joined: Sat Oct 29, 2016 11:07 pm
- Contact:
Re: My WIP Thread
I think it was the late 80s when they were together. Then, I believe the in early 90s, Ford-New Holland was sold to Fiat where they were allowed to use the Ford name for I think 10 more years after the sale was complete, then I believe it became New Holland from then on.BigC92 wrote:I was wondering that too classictractors, ford was with NH since i was a kid, this was in the 90's, i think ford was with NH in the 80's too, but they have Ford-New Holland tractors, but like you said, NH bought out Ford, so idk how that would work.
Re: My WIP Thread
I do believe you have something here, but i just remember going by a dealership and seeing those big ole 4wd Ford-New Holland tractors, good memories.ClassicTractors wrote:I think it was the late 80s when they were together. Then, I believe the in early 90s, Ford-New Holland was sold to Fiat where they were allowed to use the Ford name for I think 10 more years after the sale was complete, then I believe it became New Holland from then on.BigC92 wrote:I was wondering that too classictractors, ford was with NH since i was a kid, this was in the 90's, i think ford was with NH in the 80's too, but they have Ford-New Holland tractors, but like you said, NH bought out Ford, so idk how that would work.
- redglasses
- Posts: 5909
- Joined: Fri Jan 27, 2017 7:01 pm
- Location: Farming land, Canada
Re: My WIP Thread
ya those are nice tractors
Playing Lincoln Creek on PC
Upload your screenshots here: IMG server
My Discord
Remember there is no need to spread your manure around the forums
Jack of all trades, master of the skid steer
Upload your screenshots here: IMG server
My Discord
Remember there is no need to spread your manure around the forums
Jack of all trades, master of the skid steer
- ClassicTractors
- Posts: 986
- Joined: Sat Oct 29, 2016 11:07 pm
- Contact:
Re: My WIP Thread
Update on the Gooseneck: I have continued work on the 3-D model and it is coming along nicely. I still don't have an estimate on when the model will be done. I would upload a screenshot but every time I try, it says it is an invalid file extension.