Deutz-Fahr Agrotron Mk3 Series

Post Reply
juf.de
Posts: 3816
Joined: Fri Mar 30, 2012 8:04 pm

Deutz-Fahr Agrotron Mk3 Series

Post by juf.de »

ModLink:
https://www.farming-simulator.com/mod.p ... tle=fs2019

Probleme:
Laut dem dlg Datenblatt ist die große Baureihe (6 Zylinder) rund 33% zu leicht, er wiegt im Spiel etwa so viel wie die kleine Baureihe sollte aber über 6 Tonnen schwer sein. Die Gewichtsverteilung sollte auch nochmal überarbeitet werden, da er gerade mit dem Frontheber deutlich leichter umfällt als mit den Gewichtsplatten.

Im Spiel sind auch die Motorleistung und Geschwindigkeit etwas zu hoch eingestellt, sofern es neben dem im oben verlinkten Bericht keine weiteren Getriebevarianten gab, sollte er maximal 48 km/h fahren und die Leistung etwa bei der angegebenen Baureihennummerierung liegen. Er hat aber in der kleinsten Ausführung schon über 140 PS.
Meine Masse und Gewichtsverteilung:

Code: Select all

<base>
        <typeDesc>$l10n_typeDesc_tractor</typeDesc>
        <filename>agrotronMK3_big.i3d</filename>
        <size width="3" length="5" lengthOffset="-0.2"/>
        <components>
            <component centerOfMass="0 0.85 -0.77" solverIterationCount="20" mass="4000" />
            <component centerOfMass="0 0.0 0"  solverIterationCount="20" mass="1140" />
			<joint component1="1" component2="2" node="frontAxisJoint" rotLimit="0 0 13" transLimit="0 0 0"/>
        </components>
        <schemaOverlay attacherJointPosition="0 0">
            <default name="DEFAULT_VEHICLE"/>
            <turnedOn name="DEFAULT_VEHICLE_ON"/>
            <selected name="DEFAULT_VEHICLE_SELECTED"/>
            <turnedOnSelected name="DEFAULT_VEHICLE_SELECTED_ON"/>
        </schemaOverlay>
    </base>

Code: Select all

<attacherJointConfigurations title="$l10n_configuration_frontpart">
            <attacherJointConfiguration name="$l10n_configuration_weightCarrier" price="0">
				<objectChange node="deutzmk3_main_component" massActive="4000" />
                <objectChange node="deutzmk3_main_component" centerOfMassActive="0 0.85 -0.77" />
				<objectChange node="frontHydraulicVis"           visibilityActive="false"/>
				<objectChange node="weightCarrier"               visibilityActive="true"/>
				<objectChange node="p200kg"                      visibilityActive="false"/>
				<objectChange node="p300kg"                      visibilityActive="false"/>
				<objectChange node="p400kg"                      visibilityActive="false"/>
				<objectChange node="p500kg"                      visibilityActive="false"/>
				<objectChange node="p600kg"                      visibilityActive="false"/>
				<objectChange node="p700kg"                      visibilityActive="false"/>
				<objectChange node="p800kg"                      visibilityActive="false"/>
				<objectChange node="p900kg"                      visibilityActive="false"/>
				<objectChange node="p1000kg"                     visibilityActive="false"/>
				<objectChange node="p1100kg"                     visibilityActive="false"/>
				<objectChange node="lowerLinkFront"              visibilityActive="false"/>
				<objectChange node="screwHead"                   translationActive="0.002 0.72 1.738"/>
				<objectChange node="screwScalePart"              translationActive="-0.002 0.707 1.574"/>
				<objectChange node="screwScalePart"              scaleActive="1 1 1"/>
				<objectChange node="colPartConfig"               compoundChildActive="false" compoundChildInactive="true"/>
				<objectChange node="colPartConfig"               translationActive="0 -0.197 -0.244"/>
				<objectChange node="trailerAttacherJointFront"   translationActive="0 0.993 1.694"/>
				<objectChange node="hydraulicFront"               visibilityActive="false"/>
            </attacherJointConfiguration>
			<attacherJointConfiguration name="$l10n_configuration_frontWeightX" price="600" params="500">
				<objectChange node="deutzmk3_main_component" massActive="4500" />
                <objectChange node="deutzmk3_main_component" centerOfMassActive="0 0.85 -0.55" />
				<objectChange node="frontHydraulicVis"           visibilityActive="false"/>
				<objectChange node="weightCarrier"               visibilityActive="true"/>
				<objectChange node="p200kg"                      visibilityActive="true"/>
				<objectChange node="p300kg"                      visibilityActive="true"/>
				<objectChange node="p400kg"                      visibilityActive="true"/>
				<objectChange node="p500kg"                      visibilityActive="true"/>
				<objectChange node="p600kg"                      visibilityActive="false"/>
				<objectChange node="p700kg"                      visibilityActive="false"/>
				<objectChange node="p800kg"                      visibilityActive="false"/>
				<objectChange node="p900kg"                      visibilityActive="false"/>
				<objectChange node="p1000kg"                     visibilityActive="false"/>
				<objectChange node="p1100kg"                     visibilityActive="false"/>
				<objectChange node="lowerLinkFront"              visibilityActive="false"/>
				<objectChange node="screwHead"                   translationActive="0.002 0.72 1.738"/>
				<objectChange node="screwScalePart"              translationActive="-0.002 0.707 1.574"/>
				<objectChange node="screwScalePart"              scaleActive="1 1 1"/>
				<objectChange node="colPartConfig"               compoundChildActive="true" compoundChildInactive="false"/>
				<objectChange node="colPartConfig"               translationActive="0 -0.197 -0.244"/>
				<objectChange node="trailerAttacherJointFront"   translationActive="0 0.993 0.959"/>
				<objectChange node="hydraulicFront"               visibilityActive="false"/>
            </attacherJointConfiguration>
			<attacherJointConfiguration name="$l10n_configuration_frontWeightX" price="1365" params="1000">
				<objectChange node="deutzmk3_main_component" massActive="5000" />
                <objectChange node="deutzmk3_main_component" centerOfMassActive="0 0.85 -0.37" />
				<objectChange node="frontHydraulicVis"           visibilityActive="false"/>
				<objectChange node="weightCarrier"               visibilityActive="true"/>
				<objectChange node="p200kg"                      visibilityActive="true"/>
				<objectChange node="p300kg"                      visibilityActive="true"/>
				<objectChange node="p400kg"                      visibilityActive="true"/>
				<objectChange node="p500kg"                      visibilityActive="true"/>
				<objectChange node="p600kg"                      visibilityActive="true"/>
				<objectChange node="p700kg"                      visibilityActive="true"/>
				<objectChange node="p800kg"                      visibilityActive="true"/>
				<objectChange node="p900kg"                      visibilityActive="true"/>
				<objectChange node="p1000kg"                     visibilityActive="true"/>
				<objectChange node="p1100kg"                     visibilityActive="false"/>
				<objectChange node="lowerLinkFront"              visibilityActive="false"/>
				<objectChange node="screwHead"                   translationActive="0.002 0.72 1.933"/>
				<objectChange node="screwScalePart"              translationActive="-0.002 0.707 1.725"/>
				<objectChange node="screwScalePart"              scaleActive="1 1 1.37"/>
				<objectChange node="colPartConfig"               compoundChildActive="true" compoundChildInactive="false"/>
				<objectChange node="colPartConfig"               translationActive="0 -0.197 -0.055"/>
				<objectChange node="trailerAttacherJointFront"   translationActive="0 0.993 0.959"/>
				<objectChange node="hydraulicFront"               visibilityActive="false"/>
            </attacherJointConfiguration>
(ich hab für mich einige Konfigurationen entfernt, der generelle Trend sollte aber erkennbar sein)


Meine Motorkonfiguration:

Code: Select all

        <motorConfigurations>
            <motorConfiguration name="Agrotron 106" hp="100" price="0">
				<motor torqueScale="0.444" minRpm="800" maxRpm="2300" maxForwardSpeed="45" maxBackwardSpeed="15" brakeForce="7" lowBrakeForceScale="0.22" lowBrakeForceSpeedLimit="1" rotInertia="0.0015">
                    <torque normRpm="0.45" torque="0.9"/>
					<torque normRpm="0.5"  torque="0.97"/>
					<torque normRpm="0.59" torque="1"/>
					<torque normRpm="0.72" torque="1"/>
					<torque normRpm="0.86" torque="0.88"/>
					<torque normRpm="1"    torque="0.72"/>
                </motor>
                <transmission minForwardGearRatio="14.75" maxForwardGearRatio="250" minBackwardGearRatio="40" maxBackwardGearRatio="250" />
				<objectChange node="decal106" visibilityActive="false"/>
				<objectChange node="decal110" visibilityActive="false"/>
                <objectChange node="decal115" visibilityActive="false"/>
				
                <objectChange node="number2_0" visibilityActive="false"/>
                <objectChange node="number2_1" visibilityActive="false"/>
                <objectChange node="number8_0" visibilityActive="false"/>
                <objectChange node="number8_1" visibilityActive="false"/>
				
				<objectChange node="number5_0" visibilityActive="false"/>
                <objectChange node="number5_1" visibilityActive="false"/>
                <objectChange node="number0_0" visibilityActive="false"/>
                <objectChange node="number0_1" visibilityActive="false"/>
            </motorConfiguration>		
            <motorConfiguration name="Agrotron 110" hp="105" price="0">
				<motor torqueScale="0.464" minRpm="800" maxRpm="2300" maxForwardSpeed="45" maxBackwardSpeed="15" brakeForce="7" lowBrakeForceScale="0.22" lowBrakeForceSpeedLimit="1" rotInertia="0.0015">
                    <torque normRpm="0.45" torque="0.9"/>
					<torque normRpm="0.5"  torque="0.97"/>
					<torque normRpm="0.59" torque="1"/>
					<torque normRpm="0.72" torque="1"/>
					<torque normRpm="0.86" torque="0.88"/>
					<torque normRpm="1"    torque="0.72"/>
                </motor>
                <transmission minForwardGearRatio="14.75" maxForwardGearRatio="250" minBackwardGearRatio="40" maxBackwardGearRatio="250" />
				<objectChange node="decal106" visibilityActive="false"/>
				<objectChange node="decal110" visibilityActive="false"/>
                <objectChange node="decal115" visibilityActive="false"/>
				
                <objectChange node="number2_0" visibilityActive="false"/>
                <objectChange node="number2_1" visibilityActive="false"/>
                <objectChange node="number8_0" visibilityActive="false"/>
                <objectChange node="number8_1" visibilityActive="false"/>
				
				<objectChange node="number5_0" visibilityActive="false"/>
                <objectChange node="number5_1" visibilityActive="false"/>
                <objectChange node="number0_0" visibilityActive="false"/>
                <objectChange node="number0_1" visibilityActive="false"/>
            </motorConfiguration>
			<motorConfiguration name="Agrotron 115" hp="125" price="5500">
				<motor torqueScale="0.545" minRpm="800" maxRpm="2300" maxForwardSpeed="45" maxBackwardSpeed="15" brakeForce="7" lowBrakeForceScale="0.22" lowBrakeForceSpeedLimit="1" rotInertia="0.0015">
                    <torque normRpm="0.45" torque="0.9"/>
					<torque normRpm="0.5"  torque="0.97"/>
					<torque normRpm="0.59" torque="1"/>
					<torque normRpm="0.72" torque="1"/>
					<torque normRpm="0.86" torque="0.88"/>
					<torque normRpm="1"    torque="0.72"/>
                </motor>
                <transmission minForwardGearRatio="14.75" maxForwardGearRatio="250" minBackwardGearRatio="40" maxBackwardGearRatio="250" />
				<objectChange node="decal106" visibilityActive="false"/>
				<objectChange node="decal110" visibilityActive="false"/>
                <objectChange node="decal115" visibilityActive="false"/>
				
                <objectChange node="number2_0" visibilityActive="false"/>
                <objectChange node="number2_1" visibilityActive="false"/>
                <objectChange node="number8_0" visibilityActive="false"/>
                <objectChange node="number8_1" visibilityActive="false"/>
				
				<objectChange node="number5_0" visibilityActive="false"/>
                <objectChange node="number5_1" visibilityActive="false"/>
                <objectChange node="number0_0" visibilityActive="false"/>
                <objectChange node="number0_1" visibilityActive="false"/>
            </motorConfiguration>
			<motorConfiguration name="Agrotron 120" hp="130" price="5500">
				<motor torqueScale="0.565" minRpm="800" maxRpm="2300" maxForwardSpeed="45" maxBackwardSpeed="15" brakeForce="7" lowBrakeForceScale="0.22" lowBrakeForceSpeedLimit="1" rotInertia="0.0015">
                    <torque normRpm="0.45" torque="0.9"/>
					<torque normRpm="0.5"  torque="0.97"/>
					<torque normRpm="0.59" torque="1"/>
					<torque normRpm="0.72" torque="1"/>
					<torque normRpm="0.86" torque="0.88"/>
					<torque normRpm="1"    torque="0.72"/>
                </motor>
                <transmission minForwardGearRatio="14.75" maxForwardGearRatio="250" minBackwardGearRatio="40" maxBackwardGearRatio="250" />
				<objectChange node="decal106" visibilityActive="false"/>
				<objectChange node="decal110" visibilityActive="false"/>
                <objectChange node="decal115" visibilityActive="false"/>
				
                <objectChange node="number2_0" visibilityActive="false"/>
                <objectChange node="number2_1" visibilityActive="false"/>
                <objectChange node="number8_0" visibilityActive="false"/>
                <objectChange node="number8_1" visibilityActive="false"/>
				
				<objectChange node="number5_0" visibilityActive="false"/>
                <objectChange node="number5_1" visibilityActive="false"/>
                <objectChange node="number0_0" visibilityActive="false"/>
                <objectChange node="number0_1" visibilityActive="false"/>
            </motorConfiguration>
			<motorConfiguration name="Agrotron 135" hp="145" price="5500">
				<motor torqueScale="0.625" minRpm="800" maxRpm="2300" maxForwardSpeed="45" maxBackwardSpeed="15" brakeForce="7" lowBrakeForceScale="0.22" lowBrakeForceSpeedLimit="1" rotInertia="0.0015">
                    <torque normRpm="0.45" torque="0.9"/>
					<torque normRpm="0.5"  torque="0.97"/>
					<torque normRpm="0.59" torque="1"/>
					<torque normRpm="0.72" torque="1"/>
					<torque normRpm="0.86" torque="0.88"/>
					<torque normRpm="1"    torque="0.72"/>
                </motor>
                <transmission minForwardGearRatio="14.75" maxForwardGearRatio="250" minBackwardGearRatio="40" maxBackwardGearRatio="250" />
				<objectChange node="decal106" visibilityActive="false"/>
				<objectChange node="decal110" visibilityActive="false"/>
                <objectChange node="decal115" visibilityActive="false"/>
				
                <objectChange node="number2_0" visibilityActive="false"/>
                <objectChange node="number2_1" visibilityActive="false"/>
                <objectChange node="number8_0" visibilityActive="false"/>
                <objectChange node="number8_1" visibilityActive="false"/>
				
				<objectChange node="number5_0" visibilityActive="false"/>
                <objectChange node="number5_1" visibilityActive="false"/>
                <objectChange node="number0_0" visibilityActive="false"/>
                <objectChange node="number0_1" visibilityActive="false"/>
            </motorConfiguration>
        </motorConfigurations>
(ich hab für mich die zwei großen Ausführungen noch ergänzt und aus dem Grund die Decals generell deaktiviert, der Übersichtlichkeit halber aber den kompletten motorConfigurations Block hier genommen)
Die ingame Werte wurden durch gsVehicleDebugPhysics ermittelt
Tutorials: log.txt, Giants Bilderhoster, erweiterter Texteditor, Konsole (PC)    /    Direktlink Giants Imagehoster
[PC] [Mac] [XB1] [PS4] in the thread title keeps the Forum clean / im Threadtitel hält das Forum übersichtlich
Playing on PC
Top
Post Reply

Return to “ModHub Fehlermeldungen”