John Deere s790

[bader420]

The John Deere s790 doesn't work with any of the it runner stuff giants please fix that combine

[Aholz89]

Just out of curiosity, what exactly doesn't work? Will it not empty into the bins?

[bader420]

The combine won't dump on the go with them as well as some auger wagons that are not mods

[Eische]

The John Deere s790 doesn't work with any of the it runner stuff giants please fix that combine

Can you be more specific on what does not work?
Which ITRunner equipment are you using?

JD S790 unloads just fine into the grain bins of both ITR packs. No problem at at. Does not matter if the bins are mounted on the trailers or put on the ground. Works all the time.

EDIT:

The combine won't dump on the go with them as well as some auger wagons that are not mods

Jep, I can confirm that. Tested with both ITR packs (small and large grain bin). Unload on the go does not work while the helper is driving the combine. The combine folds out the pipe when the tractor plus ITR approaches. Once grain bin is in correct position the pipe folds back in. It seems to refer to the very front of the ITR trailer.

Checked with the NH CR10.90 and this one unloads just fine while on the go.

Tested the JD S790 with the Kroeger TKD302. Unload on the go works just fine.

@bader420: I recommend writing a bug report, as this issue might not be noticed here

[crash]

I have used the custom modding s790, and the orginal itr runner pack has a very limited zone to where it accepts to take a load with a worker, its all the way up front in the 45m3 container. they auger will go in and out several times when you are in the zone, but its so small thaht you are mostly not in the zone.. Found it easier to just stop the combine and do it myself, rather than unload on the go with a hired worker in the combine.

[Thedebe48]

I have ran into this exact same issue with S790 and the large Kinze grain cart when dumping on the go. For some reason though I don't have any issues with the Elmers grain carts or the Brent Avalanche 1596 cart.

[bader420]

I am on console I think it's a console problem

[crash]

Both then, as I'm on pc

[bader420]

I just hope it gets fixed I love JD

[donaldpott]

I run Follow me and have the AI run the cart and no problems running it that way.

[Emil Jørgensen]

IRL would you put the container at the edge of the field, then use an auger wagon to fill it up. After that will you get you'r IT Runner trailer and lift up the container again.

[Bhcc]

Same problem on PS4. I have used the SB II 30/1070 and the Idealiner 106 mod trailers. The smaller JD combine works fine. This is also after the latest update as of June 27, 2019.

[livesea72]

Same with Krampe bb mod pack as well. Pipe moves in and out and only functions when stopped.

[TruenorthKing]

I have the same issue on Xbox one. I use the s790 combine while running a Kinze 1051 grain cart and it also has a very limited unloading trigger area while on the go.

[Walrusman02]

I have the same issue on Xbox one. I use the s790 combine while running a Kinze 1051 grain cart and it also has a very limited unloading trigger area while on the go.

This exact problem/setup with mine, might go back to the smaller jd and keep the bigger header on it