Please find the gearbox config I use on Case IH 1455xl that is close to IRL (i used same config on previous FS version also).
It's the 40km/h gearbox with 3 ranges L (Low) H (High) and R (Rear) respectively (A, S, R in german) and 6 gears per ranges. As you can notice ranges are "interlaced", meaning that if you want to use all speeds in ascending order you would set
1L 1H 2L 2H 3L 3H 4L 4H 5L 5H 6L 6H
It's useful to know that when you drive a loaded trailer, you might only need to downshift from 6H to 6L instead of 6H to 5H.
Code: Select all
<transmission autoGearChangeTime="0" gearChangeTime="0" name="$l10n_info_transmission_manual">
<directionChange useGear="false" useGroup="true" changeTime="0.5"/>
<groups type="DEFAULT" changeTime="1.2">
<group ratio="-1.308" name="R" />
<group ratio="0.797" name="L" />
<group ratio="1.000" name="H" />
</groups>
<forwardGear maxSpeed="3.9" name="1"/>
<forwardGear maxSpeed="6.2" name="2"/>
<forwardGear maxSpeed="9.7" name="3"/>
<forwardGear maxSpeed="14.7" name="4"/>
<forwardGear maxSpeed="22.8" name="5"/>
<forwardGear maxSpeed="40" name="6"/>
</transmission>