Pumps & Hoses issue

User avatar
DMZ Commander
Posts: 692
Joined: Sat Oct 10, 2020 10:24 pm

Pumps & Hoses issue

Post by DMZ Commander »

Trying this DLC out and for whatever reason when I lower the SPC1230, the SP12260, or the BS900 it seems the center span of the distributor gets hung up on the HS5100 tool and will not make ground contact. The all in one SP8040 seems to operate as intended. Anyone else have such an issue. Tried it on both the 7R and 8R tractors. I'll dabble with something red next but I don't think a base game tractor is the issue.
PC Master Race
Phanteks Enthoo Elite
Z590 Godlike
i9 11900k
RTX 3090
64GB Ram
x2 2TB SSD
Oddyssey Neo G9
Ssniper
Posts: 5
Joined: Sun Mar 08, 2020 3:30 am

Re: Pumps & Hoses issue

Post by Ssniper »

I had the same issue at first. I discovered the HS5100 tool needs to be selected and lowered and then it worked as it should for me.
User avatar
DMZ Commander
Posts: 692
Joined: Sat Oct 10, 2020 10:24 pm

Re: Pumps & Hoses issue

Post by DMZ Commander »

I had tried that but when I hit lower it didn't lower lol. I'll try via K&M just incase
PC Master Race
Phanteks Enthoo Elite
Z590 Godlike
i9 11900k
RTX 3090
64GB Ram
x2 2TB SSD
Oddyssey Neo G9
User avatar
DMZ Commander
Posts: 692
Joined: Sat Oct 10, 2020 10:24 pm

Re: Pumps & Hoses issue

Post by DMZ Commander »

Ok so yes, that fixed the issue. The DLC is just difficult and requires you to select that specific tool and hit a different button than the standard lower tool button. All good, thanks
PC Master Race
Phanteks Enthoo Elite
Z590 Godlike
i9 11900k
RTX 3090
64GB Ram
x2 2TB SSD
Oddyssey Neo G9
Ssniper
Posts: 5
Joined: Sun Mar 08, 2020 3:30 am

Re: Pumps & Hoses issue

Post by Ssniper »

Glad everything worked out. I like the DLC just takes some playing around to figure things out.
User avatar
DMZ Commander
Posts: 692
Joined: Sat Oct 10, 2020 10:24 pm

Re: Pumps & Hoses issue

Post by DMZ Commander »

Oh without a doubt. I intend to purchase field 36 on my griffin save and delete the field and put in my own biogas plant from the DLC and start running the Hoses all over the place haha
PC Master Race
Phanteks Enthoo Elite
Z590 Godlike
i9 11900k
RTX 3090
64GB Ram
x2 2TB SSD
Oddyssey Neo G9
Sponge1000
Posts: 14
Joined: Fri Feb 23, 2018 7:08 pm

Re: Pumps & Hoses issue

Post by Sponge1000 »

Is any one having issues with precision farming

I set the pumps n hoses up ready to apply slurry to grassland, post harvest. (Or after first cut)

Everything was connected and switched on yet no slurry was applied
John Deere nitrogen sensor attached to the tool (slurry distributor)

So I switched off auto distribution and manually increased the rate of slurry up to it max.

I then got the even amount of slurry applied to the field yet there was no recognition on the mini map. Field was still showing red even though I was adding nitrogen (in the form of slurry)

Am I doing something wrong or is this a bug or something missed by the modders


Actually really impressed by the mod it works really in practice, could do with a few more bits like pipes connecting to source tank.

Anyhow

Cheers
Post Reply