G923 wheel not working.

[Jet_Stream]

I have recently got the G923 wheel from Logitech and it works fine on every game I've used it on except for FS19. I have it plugged on via USB like normal, I launch FS19 from Steam like normal, but when I try to load a game or create a new one, with or without mods, it just loads forever. I unplug the wheel USB and relaunch the game and I can load and create games like normal.

[Noraf]

With the wheel connected, start up the game, and after a minute or so of the infinite load, upload the log.txt file.

[TheSuBBie]

Try this topic for idea's

viewtopic.php?f=964&t=161431

[Jet_Stream]

With the wheel connected, start up the game, and after a minute or so of the infinite load, upload the log.txt file.

https://gist.github.com/JetStream4396/0 ... 10489814f0 This is the log with the G923 and Heavy Equipment Side Panel both connected. I started a new game on Ravenport with none of my mods or even DLCs activated.

[Jet_Stream]

Try this topic for idea's

viewtopic.php?f=964&t=161431

That appears to only relate to Force Feedback issues. I can't even get a save to load.

[TheSuBBie]

I suggest you remove ALL your mods and pdlc's from the mods and pdlc folders and try starting the game, if that works then you have a mod conflict so you will have to load the mods you have in blocks of say 10 until you find the block that causes the problem and the reduce the block size until you find the mod causing the problem

[Jet_Stream]

I suggest you remove ALL your mods and pdlc's from the mods and pdlc folders and try starting the game, if that works then you have a mod conflict so you will have to load the mods you have in blocks of say 10 until you find the block that causes the problem and the reduce the block size until you find the mod causing the problem

I have already tried this and there is no change. It still launches fine, still infinitely loads when loading or creating a game. Here is the log from that test. https://gist.github.com/JetStream4396/4 ... 740459d3f3

[TheSuBBie]

Have you got the latest drivers (16/03/21) installed for your wheel

https://support.logi.com/hc/en-gb/artic ... -Stub-G923

[Jet_Stream]

Have you got the latest drivers (16/03/21) installed for your wheel

https://support.logi.com/hc/en-gb/artic ... -Stub-G923

I would assume so. I got the wheel the day before starting this topic and have no issues in any other game I have used it in, though I will check to be sure in a few hours.

[TheSuBBie]

The logitech stuff, and other manufacturers do not supply the latest drivers with their stuff but generally ship ones that are current for the date of manufacture.

[Jet_Stream]

The logitech stuff, and other manufacturers do not supply the latest drivers with their stuff but generally ship ones that are current for the date of manufacture.

Everything is up to date and still having the issue with identical logs.

[TheSuBBie]

Out of curiosity how have you set up the the pedals with the wheel, separate or combined because looking at the input Devices.xml for the G923 XboxOne_PC.xml there seems to be a known problem with the G923 drivers.

<!-- G923 drivers always rapport trigger axis even in combined axis mode. Thats why combined mode does not work -->

[Jet_Stream]

Out of curiosity how have you set up the the pedals with the wheel, separate or combined because looking at the input Devices.xml for the G923 XboxOne_PC.xml there seems to be a known problem with the G923 drivers.

<!-- G923 drivers always rapport trigger axis even in combined axis mode. Thats why combined mode does not work -->

I have them combined because the G923 pedals can't connect to the PC directly.

[TheSuBBie]

As far as I'm aware the pedals are connected to the wheel which is then connected to the computer via the usb
https://www.logitech.com/assets/65932/2 ... el-qsg.pdf






So your set up should be as shown with the pedals set to sepearate

[Jet_Stream]

As far as I'm aware the pedals are connected to the wheel which is then connected to the computer via the usb
https://www.logitech.com/assets/65932/2 ... el-qsg.pdf






So your set up should be as shown with the pedals set to sepearate

Ok, I was a bit confused at first, but I do see what you are saying now. That is how they connect to the PC, and they are set to separate already.