- PC/Mac/PS4/XB1:PC and Xbox One
- Vehicle/Tool/Model/Object: John Deere S790 with headers...all headers
- Issue: Headers are are attached skew
- Single- or Multiplayer:
- Steps to reproduce: attach any header
- Does it happen on a standard map without mods yes/no Yes
See what I mean between red lines in the pic below.
[READ] John Deere S790 headers are skew when attached
7 posts
Page 1 of 1
-
- Posts: 624
- Joined: Mon Nov 19, 2012 11:26 am
-
- Posts: 624
- Joined: Mon Nov 19, 2012 11:26 am
Re: John Deere S790 headers are skew when attached
Please confirm this issue....
Re: John Deere S790 headers are skew when attached
Yes, it doesn't look good and it doesn't work good.
I hope it is fixed some point.
I hope it is fixed some point.
PS5 / FS22
Re: [READ] John Deere S790 headers are skew when attached
I can confirm this on PC as well.
1. They are skewed as shown in the pictures.
2. Headers are not positioned correctly. I tested the JD 645FD, JD 618C and Capello HS16. Headers need to be moved up and to the back. There are not attached at the supposed position.
3. On the JD 618C the support bars need to be removed when header is attached to combine
1. They are skewed as shown in the pictures.
2. Headers are not positioned correctly. I tested the JD 645FD, JD 618C and Capello HS16. Headers need to be moved up and to the back. There are not attached at the supposed position.
3. On the JD 618C the support bars need to be removed when header is attached to combine
Playing on PC - Win10
Ryzen 3600
RX 5500XT
16GB Ram
How to post log file
How to upload pictures
Please report bugs for FS22 using the bugtracker
Ryzen 3600
RX 5500XT
16GB Ram
How to post log file
How to upload pictures
Please report bugs for FS22 using the bugtracker
Re: [READ] John Deere S790 headers are skew when attached
Those support bars are some type of shipping bracket, yes? They are on both corn headers - should disappear when attached to the harvester.
Eische is right about the header position also. The beam across the top of the spot where crops pass through - it should sit on top of the lip above the combine crop intake part.
Eische is right about the header position also. The beam across the top of the spot where crops pass through - it should sit on top of the lip above the combine crop intake part.
Re: [READ] John Deere S790 headers are skew when attached
I just wanted to let Giants know this is very fixable and should not take long. This is a ".i3d" fix that involves the Translate Z and the Rotate values.
For those who can fix it themselves, it would have to be as a mod since the only file that can be changed without a mod is the xml file. Any shape file change requires a mod. I eyeballed the changes until it looked just right.
Edit: This is for the S790.
For those who can fix it themselves, it would have to be as a mod since the only file that can be changed without a mod is the xml file. Any shape file change requires a mod. I eyeballed the changes until it looked just right.
Edit: This is for the S790.
7 posts
Page 1 of 1