[READ] Patch 1.2 Thrustmaster T80 pedal mapping

[jimjam828]

Thrustmaster T80 Acc/Brake pedals worked correctly with Patch 1.1.3
Patch 1.2 Sets Acc/Brake to Axis11 but pedals do not work. Cannot remap within in-game controls menu using ESC then operating pedals. Steering maps and works correctly.
I also note that in gamestart sensitivity Selection menu, T80 only has Axis 1 showing (which is Steering)
This is on standard Ravenport and Felsbrunn maps, no mods
Have reverted to Patch 1.1.3 and T80 is working correctly again

Edit
have tried deleting keybindings, reloading, remapping. Nothing makes pedals work.

Also, many of the switch descriptions on Control Mapping and Helpbox are incorrect. I have just discovered the T80 file in Input devices Folder. I have made some changes to this which corrects the wheel switch descriptions but Brake and accel still not working. I can send you the amended T80 File if that would be helpful

Edit two
I normally use Keyboard, mouse, T80 wheel and Xbox360 (all USB) these worked on FS17 and FS19 up to Patch 1.1.3
To avoid possible conflict I removed Xbox360 and retested everything, deleting logs and input bindings before re-installing patch 1.1.3 then Patch 1.2
No changes, T8o wheel accel and brake pedals will still not work on Patch 1.2.

If it is any help, I list the changes I made to the T80 Input Devices file ( after doing all this testing) which sets the T80 switch names correctly when remapping

<buttonMappings>
<buttonMapping physical="0" logical="0" label="LT"/>
<buttonMapping physical="1" logical="1" label="RT" />
<buttonMapping physical="2" logical="2" label="Triangle" />
<buttonMapping physical="3" logical="3" label="Circle" />
<buttonMapping physical="4" logical="6" label="Square" />
<buttonMapping physical="5" logical="7" label="Cross" />
<buttonMapping physical="6" logical="4" label="Share" />
<buttonMapping physical="7" logical="5" label="Options" />
<buttonMapping physical="8" logical="8" label="R2" />
<buttonMapping physical="9" logical="9" label="L2"/>
<buttonMapping physical="10" logical="10" label="L3" />
<buttonMapping physical="11" logical="11" label="R3" />
<buttonMapping physical="12" logical="12" label="PS" />
</buttonMappings>

[lukyn555]

yea,i have same problem....