Horsch Maestro 12 has several issues

bossmanslim
Posts: 134
Joined: Thu Jan 10, 2019 7:13 pm

Horsch Maestro 12 has several issues

Post by bossmanslim » Thu Jan 10, 2019 7:59 pm

  • PC
  • Horsch Maestro 12
  • Issue 1: The graphic for opening tanks is reversed. When the fertilizer tank is opened, it shows the seed tank open (small rear tank that is pink inside). When the seed tank is opened, it shows the fertilizer tank open (large front tank that is white inside).
  • Issue 2: The feed rate for cotton is way off; I don't know about corn or the other crops. For cotton, the seeder will use 2000L of cotton seed and about 1500L of fertilizer. This means for every reload of fertilizer, the player has to reload the seed 4 times. Cotton should be 8:1 fertilizer to seed by weight. Even if we do 4 to 1 to account for the weight difference, both tanks should run out at roughly the same time, not as it currently is. The feed rate of cotton seed should be 25% of what it currently is.
  • Issue 3: The texture applied by the planter when pulled from the southwest to the northwest on the map is the cultivated texture, not the planted texture.
  • Single player
  • Plant cotton with the Horsch Maestro 12 and make sure some portion of it is in the NW direction
  • Felsbrunn, no mods

sootysax
Posts: 137
Joined: Mon Feb 10, 2014 5:24 am

Re: Horsch Maestro 12 has several issues

Post by sootysax » Tue Feb 05, 2019 6:01 pm

Not only is it just the graphic that is backwards... the Maestro will not fill from refill silos when the 'wrong cover' is open.. this is causing Courseplay to not be able to fill these planters.. please fix!

SteelRodent
Posts: 42
Joined: Fri May 12, 2017 11:18 am

Re: Horsch Maestro 12 has several issues

Post by SteelRodent » Thu Feb 07, 2019 4:20 pm

sootysax wrote:
Tue Feb 05, 2019 6:01 pm
Not only is it just the graphic that is backwards... the Maestro will not fill from refill silos when the 'wrong cover' is open.. this is causing Courseplay to not be able to fill these planters.. please fix!
I found it will only fill from silos and big bags from the front and rear, not from the sides. And when lifting the bags over the machine (the realistic way) it is super hard to get stuff to go in because the covers are mixed up.

bossmanslim
Posts: 134
Joined: Thu Jan 10, 2019 7:13 pm

Re: Horsch Maestro 12 has several issues

Post by bossmanslim » Tue Feb 12, 2019 8:04 pm

The covers being reversed is fixed in 1.3

Locked