AGCO IDEAL Header bug

ensot
Posts: 13
Joined: Sat Jan 12, 2019 9:37 pm

AGCO IDEAL Header bug

Post by ensot » Sun Feb 17, 2019 2:24 pm

- PC/Mac/PS4/XB1: PC
- Vehicle/Tool/Model/Object: Vehicle (AGCO IDEAL)
- Issue: Header is not attached all the way, leaves two big critical gaps joining harvester to the header. (With both AGCO headers)
- Single- or Multiplayer: Both.
- Steps to reproduce: Attach header to the harvester.
- Does it happen on a standard map without mods yes/no Yes.

Image
Image
Image

Sodyaler
Posts: 11
Joined: Wed Dec 26, 2018 8:08 pm

Re: AGCO IDEAL Header bug

Post by Sodyaler » Mon Feb 18, 2019 10:36 am

Does it stay like that when the header it turned on? I'm not expert but it almost looks like a clutch that would engage once you turn the header on

User avatar
Husqvarna TS 352
Posts: 477
Joined: Sun Dec 09, 2018 2:59 am
Location: The Moon

Re: AGCO IDEAL Header bug

Post by Husqvarna TS 352 » Mon Feb 18, 2019 8:30 pm

Nah, that's the PTO shaft which should be connected at all times unless you're disconnecting it
G'day

cdsang
Posts: 32
Joined: Wed Feb 07, 2018 8:57 pm

Re: AGCO IDEAL Header bug

Post by cdsang » Mon Feb 18, 2019 10:10 pm

I guess as a temporary fix you could download the Midwest Durus 50 FT header set at https://www.modhoster.de/mods/midwest-durus-50ft or the 55 FT header version at https://mega.nz/?fbclid=IwAR1_09AmqlZJa ... 5m6FVeL7PU Yeah, I know, dealing with a bigger header is going to be a drag until its fixed. :biggrin2:

SteelRodent
Posts: 49
Joined: Fri May 12, 2017 11:18 am

Re: AGCO IDEAL Header bug

Post by SteelRodent » Thu Feb 28, 2019 12:26 am

So while checking if it looks like this for me, I noticed that the hoses on top of the "funnel" - the part of the combine the header attaches to - vanish when they're just the slightest in the edge of the camera. So moving the camera just a tiny little bit makes the hoses flicker in and out of existence.

But can confirm that this gap is there for me as well, on 1.3 beta.

Another issue with this model is that the light from the headlights disappear when the front worklights are turned on. Noticed because the headlights shine on the header.

ensot
Posts: 13
Joined: Sat Jan 12, 2019 9:37 pm

Re: AGCO IDEAL Header bug

Post by ensot » Sat Mar 16, 2019 1:55 pm

SteelRodent wrote:
Thu Feb 28, 2019 12:26 am
So while checking if it looks like this for me, I noticed that the hoses on top of the "funnel" - the part of the combine the header attaches to - vanish when they're just the slightest in the edge of the camera. So moving the camera just a tiny little bit makes the hoses flicker in and out of existence.

But can confirm that this gap is there for me as well, on 1.3 beta.

Another issue with this model is that the light from the headlights disappear when the front worklights are turned on. Noticed because the headlights shine on the header.
Yes, for me also on 1.3 beta this issue is not fixed.

Locked