- PC/Mac/PS4/XB1: PC
- Vehicle/Tool/Model/Object: All
- Issue: Null zone is not enough even on the biggest setting
- Single- or Multiplayer: Both
- Steps to reproduce:
- Does it happen on a standard map without mods yes/no: Yes
I have a problem. The joystick dead zone is not enough so the front loader arms move even when I haven't touched the joystick. At 30 % dead zone I can get it to stay, some of the time but even then it moves abit at times. I have calibrated joystick and tried with two separate joysticks but with the same result.
Logitexh Extreme 3d Pro - dead zone issues
6 posts
Page 1 of 1
-
- Posts: 25
- Joined: Sat Jan 07, 2017 11:29 am
Re: Logitexh Extreme 3d Pro - dead zone issues
Is it possibly the ”throttle slider” on the base of the joystick that is involved and causing an issue somehove?
[Win11] Intel Core i9-13900F Tray 5.6GHz / MSI RTX4090 24GB GDDR6 / 2x16GB 5600MHz DDR5
-
- Posts: 25
- Joined: Sat Jan 07, 2017 11:29 am
Re: Logitexh Extreme 3d Pro - dead zone issues
Hmm, interesting, I'll do some testing.
Thanks!
Thanks!
Re: Logitexh Extreme 3d Pro - dead zone issues
I have a somewhat similar joystick and I've found that a lot times the yaw (rotating the joystick handle in place) was a little goofy. The calibration in widows always showed it moving one way or the other without my even touching it.
Playing on PC
Re: Logitexh Extreme 3d Pro - dead zone issues
There's some conflict between Logitech Profiler calibrations and FS19, resulting somehow to this situation, no "permanently working" calibration possible, neither in-game nor in Logitech Profiler... after 3 re-calibration, I simply abandonned and I do my best to work with this issue...
Sadly, as we are very few using this J-Stick, I seriously doubt there will be a fix...
Sadly, as we are very few using this J-Stick, I seriously doubt there will be a fix...
Re: Logitexh Extreme 3d Pro - dead zone issues
In the inputBindings.xml there are settings for dead zone ...
You might be able to set them higher in this file than the game menu allows you to ...
Caution ... before trying this make a copy as any faulty code leads to the game creating a new file with the default settings!
Code: Select all
<device id="0_044F-B10A-0500-XFw/XEhJRCNWSURfMDQ0RiZQSURfQjEwQSM4JjJkZDQ2NWNmJjAmMDAwMCN7NGQxZTU1YjItZjE2Zi0xMWNmLTg4Y2ItMDAxMTExMDAwMDMwfQA=" name="T.16000M" category="3">
<attributes axis="0" deadzone="0.080000" sensitivity="1.000000"/>
<attributes axis="1" deadzone="0.080000" sensitivity="1.000000"/>
<attributes axis="2" deadzone="0.080000" sensitivity="1.000000"/>
<attributes axis="3" deadzone="0.080000" sensitivity="1.000000"/>
</device>
Caution ... before trying this make a copy as any faulty code leads to the game creating a new file with the default settings!
[Win11] Intel Core i9-13900F Tray 5.6GHz / MSI RTX4090 24GB GDDR6 / 2x16GB 5600MHz DDR5
6 posts
Page 1 of 1