Bourgault seeders
Posted: Thu Nov 12, 2020 3:18 am
I have noticed that the 3420-100 hoe drill sits too high on the wings. The midrow banders and shanks on the wings do not go into into the round when lowered. The center is fine and they go into the ground but as you get farther away from the center it gets worse. I also noticed the 3320-76 drill has the same issue but to a much lesser extent the shanks appear to be in the ground when lowered but not at a realistic depth. I have tried this in a stock map with no mods and the same problem happens. I can provide screenshots of the issue if needed/ wanted.