Page 2 of 5

Re: Selectable Bale Capacity Pack - Support Thread

Posted: Sun Aug 14, 2022 12:24 am
by Decriptus
LittleWatt wrote: Sat Aug 13, 2022 9:04 pm So, I might need to redownload the Vicon FastBale. I got rid of it when I got the Kubota mod, not DLC, because the FastBaler for that had a better working speed. I averaged 8mph for the Kubota mod and only 4mph for Vicon from Giants.
The size of the windrow is what's slowing it down

Re: Selectable Bale Capacity Pack - Support Thread

Posted: Sun Aug 14, 2022 12:28 am
by LittleWatt
Decriptus wrote: Sun Aug 14, 2022 12:24 am
LittleWatt wrote: Sat Aug 13, 2022 9:04 pm So, I might need to redownload the Vicon FastBale. I got rid of it when I got the Kubota mod, not DLC, because the FastBaler for that had a better working speed. I averaged 8mph for the Kubota mod and only 4mph for Vicon from Giants.
The size of the windrow is what's slowing it down
I know. Kubota mod does the same windrow with more speed. Too much speed at times as I have to stop for the full warning.

Re: Selectable Bale Capacity Pack - Support Thread

Posted: Sun Aug 14, 2022 12:43 am
by Angler1409
LittleWatt wrote: Sun Aug 14, 2022 12:28 am
Decriptus wrote: Sun Aug 14, 2022 12:24 am
LittleWatt wrote: Sat Aug 13, 2022 9:04 pm So, I might need to redownload the Vicon FastBale. I got rid of it when I got the Kubota mod, not DLC, because the FastBaler for that had a better working speed. I averaged 8mph for the Kubota mod and only 4mph for Vicon from Giants.
The size of the windrow is what's slowing it down
I know. Kubota mod does the same windrow with more speed. Too much speed at times as I have to stop for the full warning.
I have used the Kubota fastbale settings as a reference with a few animations speeded up slightly so it should work at least as quick as the Kubota.
In testing I unlocked the speed limiter on PC and was cruising at 20mph when doing a 4x capacity bale.

Re: Selectable Bale Capacity Pack - Support Thread

Posted: Sun Aug 14, 2022 1:31 am
by LittleWatt
Angler1409 wrote: Sun Aug 14, 2022 12:43 am
LittleWatt wrote: Sun Aug 14, 2022 12:28 am
Decriptus wrote: Sun Aug 14, 2022 12:24 am

The size of the windrow is what's slowing it down
I know. Kubota mod does the same windrow with more speed. Too much speed at times as I have to stop for the full warning.
I have used the Kubota fastbale settings as a reference with a few animations speeded up slightly so it should work at least as quick as the Kubota.
In testing I unlocked the speed limiter on PC and was cruising at 20mph when doing a 4x capacity bale.
I’ll be looking forward to it.

Re: Selectable Bale Capacity Pack - Support Thread

Posted: Mon Aug 22, 2022 10:08 pm
by LittleWatt
I have run into an issue with the bales from the Kuhn 3190 and Anderson RBM2000 not going into Transport mode. I used hay bales at maximum volume. The trailer will collect them not problem but the loading arm won’t go to transport mode. I can unload them. On PS4.

Re: Selectable Bale Capacity Pack - Support Thread

Posted: Mon Aug 22, 2022 10:12 pm
by LittleWatt
Quick update. After closing the game and returning, the loader arm is in transport position but now won’t go to operating position.

Re: Selectable Bale Capacity Pack - Support Thread

Posted: Tue Aug 23, 2022 8:33 pm
by Angler1409
LittleWatt wrote: Mon Aug 22, 2022 10:12 pm Quick update. After closing the game and returning, the loader arm is in transport position but now won’t go to operating position.
Hi LittleWatt, As per first post this is a known issue and has been fixed for the update that is currently in console testing,
Fortunately it doesn't stop the unloading process.

Re: Selectable Bale Capacity Pack - Support Thread

Posted: Tue Aug 23, 2022 10:05 pm
by LittleWatt
Oops, sorry. I should’ve check first post again.

Re: Selectable Bale Capacity Pack - Support Thread

Posted: Wed Aug 24, 2022 8:07 pm
by Angler1409
LittleWatt wrote: Tue Aug 23, 2022 10:05 pm Oops, sorry. I should’ve check first post again.
No worries, I do it all the time myself :biggrin2:
Update & addon are now released so the RBM2000 will work properly now.

Re: Selectable Bale Capacity Pack - Support Thread

Posted: Fri Sep 09, 2022 1:16 pm
by Dreiviertel
I had the 85% bug / a savegame did not load and stopped at 85% with loading. Maybe the problem occured in addition with another mod, but after uninstalling only the capacity mod the savegame did load properly.
This happened only with one savegame so far. I have other saves with your mod activated and they load fine. Maybe it is just this particular savegame that is messed up.

Re: Selectable Bale Capacity Pack - Support Thread

Posted: Sat Sep 10, 2022 11:28 pm
by Angler1409
Dreiviertel wrote: Fri Sep 09, 2022 1:16 pm I had the 85% bug / a savegame did not load and stopped at 85% with loading. Maybe the problem occured in addition with another mod, but after uninstalling only the capacity mod the savegame did load properly.
This happened only with one savegame so far. I have other saves with your mod activated and they load fine. Maybe it is just this particular savegame that is messed up.
I have never had an issue personally or had any issue reported to me, It does sound like it is either a mod conflict or as you say an issue with that particular save.

Which map is the issue on?

Re: Selectable Bale Capacity Pack - Support Thread

Posted: Sun Sep 11, 2022 3:49 pm
by Dreiviertel
It was Goldcrest Valley 22.

Re: Selectable Bale Capacity Pack - Support Thread

Posted: Mon Oct 10, 2022 10:40 am
by Dreiviertel
Ok, problem identified, it wasn't your mod. The drawbar from Anton caused the problem. There was a baler from you attached to it and after uninstalling your mod, the game did load again. However, I had the "same problem" with Oma Tana's Tardis and it seems, every time you save and leave a game with anything attached to the drawbar, the save won't load. 😊

Edit: it's the same with all drawbar mods, not only Anton's.

Re: Selectable Bale Capacity Pack - Support Thread

Posted: Tue Oct 18, 2022 2:20 pm
by Angler1409
Dreiviertel wrote: Mon Oct 10, 2022 10:40 am Ok, problem identified, it wasn't your mod. The drawbar from Anton caused the problem. There was a baler from you attached to it and after uninstalling your mod, the game did load again. However, I had the "same problem" with Oma Tana's Tardis and it seems, every time you save and leave a game with anything attached to the drawbar, the save won't load. 😊

Edit: it's the same with all drawbar mods, not only Anton's.
Happy you figured out the issue and that it wasn't my mod. :biggrin2:

Re: Selectable Bale Capacity Pack - Support Thread

Posted: Mon Oct 31, 2022 8:52 am
by 111sarf111
Hiya, first let me say that I love the mod! I have run into a slight problem and that is with any of the loaders it seems, I have tested a loader and the trailer with AutoLoad, and when I have them attached to my truck there are no actions for me to use like unloading or starting to autoload. It shows that it is connected, but in the shortcut window, it is like it's not there. Hope that was not too confusing and I got the point across :D