40 and below fps on chellington valley
14 posts
Page 1 of 1
-
- Posts: 32
- Joined: Thu Apr 26, 2018 8:57 pm
40 and below fps on chellington valley
Hey,
Why do I get 40 fps and lower in chellington valley?
My pc specs are:
Nvdia rtx 3070
AMD Ryzen 7 2700X Eight-Core Processor 3.70 GHz
16 gb ddr 4
msi gaming motherboard.
I should get 60 fps with no problems?
Why do I get 40 fps and lower in chellington valley?
My pc specs are:
Nvdia rtx 3070
AMD Ryzen 7 2700X Eight-Core Processor 3.70 GHz
16 gb ddr 4
msi gaming motherboard.
I should get 60 fps with no problems?
Re: 40 and below fps on chellington valley
Log.txt?
FS15 & FS19 Platinum Edition PC (and War Thunder, Gaijin is way worse than GIANTS ever has been accused of being)
FS Comunity Trader: https://fs19communitytrader.freeforums.net/
Desktop: i5-9400f, RTX 2060, 8gb RAM, 256gb SSD.
Laptop: Pentium Silver N5000, UHD605, 4gb RAM, 1tb HDD.
Deere, Fendt, Claas, and sometimes the rest of Agco.
FS Comunity Trader: https://fs19communitytrader.freeforums.net/
Desktop: i5-9400f, RTX 2060, 8gb RAM, 256gb SSD.
Laptop: Pentium Silver N5000, UHD605, 4gb RAM, 1tb HDD.
Deere, Fendt, Claas, and sometimes the rest of Agco.
-
- Posts: 32
- Joined: Thu Apr 26, 2018 8:57 pm
Re: 40 and below fps on chellington valley
sorry, here.
- Attachments
-
- log.txt
- (246.32 KiB) Downloaded 69 times
Re: 40 and below fps on chellington valley
Thx.
Don’t see anything obvious (lots of errors, lua call stacks, etc) to cause low FPS on there, so definitely strange
Don’t see anything obvious (lots of errors, lua call stacks, etc) to cause low FPS on there, so definitely strange
FS15 & FS19 Platinum Edition PC (and War Thunder, Gaijin is way worse than GIANTS ever has been accused of being)
FS Comunity Trader: https://fs19communitytrader.freeforums.net/
Desktop: i5-9400f, RTX 2060, 8gb RAM, 256gb SSD.
Laptop: Pentium Silver N5000, UHD605, 4gb RAM, 1tb HDD.
Deere, Fendt, Claas, and sometimes the rest of Agco.
FS Comunity Trader: https://fs19communitytrader.freeforums.net/
Desktop: i5-9400f, RTX 2060, 8gb RAM, 256gb SSD.
Laptop: Pentium Silver N5000, UHD605, 4gb RAM, 1tb HDD.
Deere, Fendt, Claas, and sometimes the rest of Agco.
-
- Posts: 32
- Joined: Thu Apr 26, 2018 8:57 pm
Re: 40 and below fps on chellington valley
Thank you, is it possible to see what mod that do these errors?
could it be the mud mod for terrain?
could it be the mud mod for terrain?
Re: 40 and below fps on chellington valley
Potentially
FS15 & FS19 Platinum Edition PC (and War Thunder, Gaijin is way worse than GIANTS ever has been accused of being)
FS Comunity Trader: https://fs19communitytrader.freeforums.net/
Desktop: i5-9400f, RTX 2060, 8gb RAM, 256gb SSD.
Laptop: Pentium Silver N5000, UHD605, 4gb RAM, 1tb HDD.
Deere, Fendt, Claas, and sometimes the rest of Agco.
FS Comunity Trader: https://fs19communitytrader.freeforums.net/
Desktop: i5-9400f, RTX 2060, 8gb RAM, 256gb SSD.
Laptop: Pentium Silver N5000, UHD605, 4gb RAM, 1tb HDD.
Deere, Fendt, Claas, and sometimes the rest of Agco.
Re: 40 and below fps on chellington valley
It is strange there are only few errors in log, and most can be ignored. Your system should easily reach 60 fps.
My suggestions is to turn off Vsync as that would only be needed if you have screen tearing if FPS is to high and this is not the case. That will give a little performance boost
I would also recommend putting all of the mods on seperate drive from operating system. Preferably a SSD drive. You can change what directory the game uses for the mods in the settings.xml
If this does not help then possibly mod conflicts. Remove the heavy script mods and then test. Vehicle mods and building mods that have high poly counts can also tank FPS.
Edit: The high poly mods will only affect FPS when you use them, mainly when your close by
My suggestions is to turn off Vsync as that would only be needed if you have screen tearing if FPS is to high and this is not the case. That will give a little performance boost
I would also recommend putting all of the mods on seperate drive from operating system. Preferably a SSD drive. You can change what directory the game uses for the mods in the settings.xml
If this does not help then possibly mod conflicts. Remove the heavy script mods and then test. Vehicle mods and building mods that have high poly counts can also tank FPS.
Edit: The high poly mods will only affect FPS when you use them, mainly when your close by
- Questionnaire
- Posts: 149
- Joined: Thu Jan 12, 2017 4:51 pm
Re: 40 and below fps on chellington valley
Also only enable mods that are being used or you really plan on using, having every mod you have downloaded enabled may hurt performance.ajFarmer wrote: ↑Sat Jul 03, 2021 12:10 am It is strange there are only few errors in log, and most can be ignored. Your system should easily reach 60 fps.
My suggestions is to turn off Vsync as that would only be needed if you have screen tearing if FPS is to high and this is not the case. That will give a little performance boost
I would also recommend putting all of the mods on seperate drive from operating system. Preferably a SSD drive. You can change what directory the game uses for the mods in the settings.xml
If this does not help then possibly mod conflicts. Remove the heavy script mods and then test. Vehicle mods and building mods that have high poly counts can also tank FPS.
Playing FS 15-17-19-22 on a Razer Blade.
PC Specs
AMD Ryzen 7 5800X3D
AMD Radeon RX 590 "Fatboy"
Corsair Vengance RGB Pro 32 GB (4 x 8) DDR4-3200
Gigabyte B450 AORUS M Micro ATX AM4 Motherboard
Samsung 870 QVO Plus 1TB
Samsung 970 Evo Plus 2TB M.2
In-game username:Questionnaire
Discord: russian_man_99
PC Specs
AMD Ryzen 7 5800X3D
AMD Radeon RX 590 "Fatboy"
Corsair Vengance RGB Pro 32 GB (4 x 8) DDR4-3200
Gigabyte B450 AORUS M Micro ATX AM4 Motherboard
Samsung 870 QVO Plus 1TB
Samsung 970 Evo Plus 2TB M.2
In-game username:Questionnaire
Discord: russian_man_99
Re: 40 and below fps on chellington valley
Just an addition to the v-sync part, as you're running a nvidia card, you can use the "fast" setting for the v-sync in the nVidia Control Panel, advanced 3D programs tab
AMD R9 5900x (@4.9GHz) + NHD15, 32GB DDR4 G.SKill Ripjaws 3600 CL16, Gigabyte Aorus Master 3070 OC, nVme 980Pro 1To, Seasonic 850Gold in a Corsair 900D.
T500RS, CSPV3, TH8A +SKRS Shifter, 2x T16000M.FCS, DelanClip IR tracker, SimDashBoard, Sony Bravia 42"
T500RS, CSPV3, TH8A +SKRS Shifter, 2x T16000M.FCS, DelanClip IR tracker, SimDashBoard, Sony Bravia 42"
Re: 40 and below fps on chellington valley
Disable ALL mods and start a game on Chellington. What do you get?
-
- Posts: 32
- Joined: Thu Apr 26, 2018 8:57 pm
Re: 40 and below fps on chellington valley
sorry for late answer, withoud any mods, I get 60 fps with the starting equipment with the map.
-
- Posts: 32
- Joined: Thu Apr 26, 2018 8:57 pm
Re: 40 and below fps on chellington valley
I removed alot of mods and I start a new save game and so far the fps is fine, I think I maybe had to many script mods.
Re: 40 and below fps on chellington valley
also try looking into your shader cache floder, and delete all inside, there should only be 1 shader inside the folder, but some maps create additional and additional so it can get stuck up there, so every now and then delete whats in that folder, after you do so the 1st youl go in a map it will lag a bit before it creates a new shader , but this also helps sometimes
-
- Posts: 32
- Joined: Thu Apr 26, 2018 8:57 pm
Re: 40 and below fps on chellington valley
there was only one shader, but it seems it works good now, I am around 50-60 fps with some mods.
thanks all for the help!
thanks all for the help!
14 posts
Page 1 of 1